/* Startup hooks */
-/* SPL */
-#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
-
/* Memory sizes */
-#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
-#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
-#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
/* OCRAM at 0x0 ; 32kB on MX23 ; 128kB on MX28 */
#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
#endif
/* Point initial SP in SRAM so SPL can use it too. */
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/*
* We need to sacrifice first 4 bytes of RAM here to avoid triggering some
* As for the SPL, we must avoid the first 4 KiB as well, but we load the
* IVT and CST to 0x8000, so we don't need to waste the subsequent 4 KiB.
*/
-#define CONFIG_SYS_TEXT_BASE 0x40002000
-#define CONFIG_SPL_TEXT_BASE 0x00001000
/* U-Boot general configuration */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
-#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
- /* Boot argument buffer size */
-#define CONFIG_AUTO_COMPLETE /* Command auto complete */
-#define CONFIG_CMDLINE_EDITING /* Command history etc */
-
-/* Booting Linux */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
/*
* Drivers
*/
-
-/* APBH DMA */
-#define CONFIG_APBH_DMA
-
-/* GPIO */
-#define CONFIG_MXS_GPIO
-
/*
* DUART Serial Driver.
* Conflicts with AUART driver which can be set by board.
*/
-#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
-#define CONFIG_CONS_INDEX 0
/* Default baudrate can be overridden by board! */
-/* FEC Ethernet on SoC */
-#ifdef CONFIG_FEC_MXC
-#define CONFIG_MII
-#ifndef CONFIG_ETHPRIME
-#define CONFIG_ETHPRIME "FEC0"
-#endif
-#ifndef CONFIG_FEC_XCV_TYPE
-#define CONFIG_FEC_XCV_TYPE RMII
-#endif
-#endif
-
-/* LCD */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_MXS
-#endif
-
-/* MMC */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_BOUNCE_BUFFER
-#endif
-
/* NAND */
#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x60000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
/* OCOTP */
/* SPI */
#ifdef CONFIG_CMD_SPI
-#define CONFIG_HARD_SPI
-#define CONFIG_MXS_SPI
#define CONFIG_SPI_HALF_DUPLEX
#endif
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI_MXS
-#define CONFIG_EHCI_IS_TDI
-#endif
-
#endif /* __CONFIGS_MXS_H__ */