treewide: Migrate CONFIG_FSL_ESDHC to Kconfig

[platform/kernel/u-boot.git] / include / configs / mx7ulp_evk.h

diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
index 2604232..c2223bd 100644 (file)
--- a/include/configs/mx7ulp_evk.h
+++ b/include/configs/mx7ulp_evk.h
@@ -28,11 +28,20 @@
 #define IRAM_BASE_ADDR                 OCRAM_0_BASE
 #define IOMUXC_BASE_ADDR               IOMUXC1_RBASE
 
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE                        SZ_8K
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_FSL_USDHC
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+
+#define CONFIG_SYS_FSL_USDHC_NUM        1
 
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+#define CONFIG_SYS_MMC_ENV_DEV          0      /* USDHC1 */
+#define CONFIG_SYS_MMC_ENV_PART         0      /* user area */
+#define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
+#define CONFIG_SYS_MMC_IMG_LOAD_PART    1
+
+#define CONFIG_ENV_OFFSET              (12 * SZ_64K)
+#define CONFIG_ENV_SIZE                        SZ_8K
 
 /* Using ULP WDOG for reset */
 #define WDOG_BASE_ADDR                 WDG1_RBASE
@@ -55,42 +64,103 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
 #define CONFIG_BAUDRATE                        115200
 
-#undef CONFIG_CMD_IMLS
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-
 #define CONFIG_SYS_CACHELINE_SIZE      64
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_PROMPT              "=> "
 #define CONFIG_SYS_CBSIZE              512
 
-/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS             256
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE               SZ_8K
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 
-#define CONFIG_SYS_TEXT_BASE           0x67800000
 #define PHYS_SDRAM                     0x60000000
 #define PHYS_SDRAM_SIZE                        SZ_1G
 #define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
-#define CONFIG_CMD_BOOTZ
 
 #define CONFIG_LOADADDR             0x60800000
 
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_END      0x9E000000
 
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "script=boot.scr\0" \
+       "image=zImage\0" \
+       "console=ttyLP0\0" \
+       "fdt_high=0xffffffff\0" \
+       "initrd_high=0xffffffff\0" \
+       "fdt_file=imx7ulp-evk.dtb\0" \
+       "fdt_addr=0x63000000\0" \
+       "boot_fdt=try\0" \
+       "earlycon=lpuart32,0x402D0010\0" \
+       "ip_dyn=yes\0" \
+       "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+       "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+       "mmcautodetect=yes\0" \
+       "mmcargs=setenv bootargs console=${console},${baudrate} " \
+               "root=${mmcroot}\0" \
+       "loadbootscript=" \
+               "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+       "bootscript=echo Running bootscript from mmc ...; " \
+               "source\0" \
+       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+       "mmcboot=echo Booting from mmc ...; " \
+               "run mmcargs; " \
+               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+                       "if run loadfdt; then " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
+                       "else " \
+                               "if test ${boot_fdt} = try; then " \
+                                       "bootz; " \
+                               "else " \
+                                       "echo WARN: Cannot load the DT; " \
+                               "fi; " \
+                       "fi; " \
+               "else " \
+                       "bootz; " \
+               "fi;\0" \
+       "netargs=setenv bootargs console=${console},${baudrate} " \
+               "root=/dev/nfs " \
+               "ip=:::::eth0:dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+       "netboot=echo Booting from net ...; " \
+               "run netargs; " \
+               "if test ${ip_dyn} = yes; then " \
+                       "setenv get_cmd dhcp; " \
+               "else " \
+                       "setenv get_cmd tftp; " \
+               "fi; " \
+               "usb start; "\
+               "${get_cmd} ${image}; " \
+               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+                       "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
+                       "else " \
+                               "if test ${boot_fdt} = try; then " \
+                                       "bootz; " \
+                               "else " \
+                                       "echo WARN: Cannot load the DT; " \
+                               "fi; " \
+                       "fi; " \
+               "else " \
+                       "bootz; " \
+               "fi;\0" \
+
+#define CONFIG_BOOTCOMMAND \
+          "mmc dev ${mmcdev}; if mmc rescan; then " \
+                  "if run loadbootscript; then " \
+                          "run bootscript; " \
+                  "else " \
+                          "if run loadimage; then " \
+                                  "run mmcboot; " \
+                          "fi; " \
+                  "fi; " \
+          "fi"
+
 #define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR