Convert CONFIG_CMD_EEPROM et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / mx7dsabresd.h

diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index cfaf59b..39291a2 100644 (file)
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -19,13 +19,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (32 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-/* Uncomment to enable secure boot support */
-/* #define CONFIG_SECURE_BOOT */
-#define CONFIG_CSF_SIZE                        0x4000
-
 /* Network */
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
@@ -41,20 +34,12 @@
 /* MMC Config*/
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE3000
-#define CONFIG_POWER_PFUZE3000_I2C_ADDR        0x08
-
 #undef CONFIG_BOOTM_NETBSD
 #undef CONFIG_BOOTM_PLAN9
 #undef CONFIG_BOOTM_RTEMS
 
 /* I2C configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_SPEED           100000
 
 #define CONFIG_SUPPORT_EMMC_BOOT       /* eMMC specific */
@@ -185,8 +170,6 @@
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_HZ                  1000
 
-#define CONFIG_STACKSIZE               SZ_128K
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -200,8 +183,7 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
+/* environment organization */
 #define CONFIG_ENV_SIZE                        SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
 
@@ -237,13 +219,9 @@
 #define CONFIG_MMCROOT                 "/dev/mmcblk0p2"  /* USDHC1 */
 
 /* USB Configs */
-#define CONFIG_USB_STORAGE
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS   0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
 #define CONFIG_IMX_THERMAL
 
@@ -251,22 +229,11 @@
 
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 
-/* USB Device Firmware Update support */
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_MMC
-#define CONFIG_DFU_RAM
-
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO