mx6ul_14x14_evk: Remove CONFIG_SYS_GENERIC_BOARD

[platform/kernel/u-boot.git] / include / configs / mx6ul_14x14_evk.h

diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index efd5bf9..34ce9bf 100644 (file)
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -14,14 +14,16 @@
 #include "mx6_common.h"
 #include <asm/imx-common/gpio.h>
 
+#define is_mx6ul_9x9_evk()     CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
+
 /* SPL options */
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
 #include "imx6_spl.h"
 
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
 #define CONFIG_ROM_UNIFIED_SECTIONS
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
@@ -34,11 +36,6 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* MMC Configs */
 #ifdef CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
@@ -66,9 +63,13 @@
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED           100000
-#endif
 
-#define PHYS_SDRAM_SIZE                        SZ_512M
+/* PMIC only for 9X9 EVK */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR  0x08
+#endif
 
 #undef CONFIG_CMD_IMLS
 
@@ -80,7 +81,7 @@
        "console=ttymxc0\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
-       "fdt_file=imx6ul-14x14-evk.dtb\0" \
+       "fdt_file=undefined\0" \
        "fdt_addr=0x83000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
@@ -134,9 +135,19 @@
                        "fi; " \
                "else " \
                        "bootz; " \
-               "fi;\0"
+               "fi;\0" \
+               "findfdt="\
+                       "if test $fdt_file = undefined; then " \
+                               "if test $board_name = EVK && test $board_rev = 9X9; then " \
+                                       "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
+                               "if test $board_name = EVK && test $board_rev = 14X14; then " \
+                                       "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
+                               "if test $fdt_file = undefined; then " \
+                                       "echo WARNING: Could not determine dtb to use; fi; " \
+                       "fi;\0" \
 
 #define CONFIG_BOOTCOMMAND \
+          "run findfdt;" \
           "mmc dev ${mmcdev};" \
           "mmc dev ${mmcdev}; if mmc rescan; then " \
                   "if run loadbootscript; then " \
@@ -220,6 +231,27 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #endif
 
-#define CONFIG_IMX6_THERMAL
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_ENET_DEV            1
+
+#if (CONFIG_FEC_ENET_DEV == 0)
+#define IMX_FEC_BASE                   ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR          0x2
+#define CONFIG_FEC_XCV_TYPE             RMII
+#elif (CONFIG_FEC_ENET_DEV == 1)
+#define IMX_FEC_BASE                   ENET2_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR         0x1
+#define CONFIG_FEC_XCV_TYPE            RMII
+#endif
+#define CONFIG_ETHPRIME                        "FEC"
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_FEC_DMA_MINALIGN                64
+#endif
+
+#define CONFIG_IMX_THERMAL
 
 #endif