configs: Migrate CONFIG_USB_STORAGE

[platform/kernel/u-boot.git] / include / configs / mx6sxsabresd.h

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 29e9c08..86987df 100644 (file)
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -6,7 +6,6 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
@@ -26,7 +25,30 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
+#ifdef CONFIG_IMX_BOOTAUX
+/* Set to QSPI2 B flash at default */
+#define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000
+
+#define UPDATE_M4_ENV \
+       "m4image=m4_qspi.bin\0" \
+       "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
+       "update_m4_from_sd=" \
+               "if sf probe 1:0; then " \
+                       "if run loadm4image; then " \
+                               "setexpr fw_sz ${filesize} + 0xffff; " \
+                               "setexpr fw_sz ${fw_sz} / 0x10000; "    \
+                               "setexpr fw_sz ${fw_sz} * 0x10000; "    \
+                               "sf erase 0x0 ${fw_sz}; " \
+                               "sf write ${loadaddr} 0x0 ${filesize}; " \
+                       "fi; " \
+               "fi\0" \
+       "m4boot=sf probe 1:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
+#else
+#define UPDATE_M4_ENV ""
+#endif
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
+       UPDATE_M4_ENV \
        "script=boot.scr\0" \
        "image=zImage\0" \
        "console=ttymxc0\0" \
@@ -110,7 +132,6 @@
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                        SZ_1G
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -125,7 +146,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC4_BASE_ADDR
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
@@ -140,9 +160,6 @@
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
 /* Network */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 
@@ -155,12 +172,9 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
@@ -181,11 +195,7 @@
 
 #define CONFIG_IMX_THERMAL
 
-#define CONFIG_CMD_TIME
-
-
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
 #define CONFIG_SYS_FSL_QSPI_LE
 #define CONFIG_SYS_FSL_QSPI_AHB
 #ifdef CONFIG_MX6SX_SABRESD_REVA