Convert CONFIG_SPLASH_SCREEN et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / mx6sxsabresd.h

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index b39ab72..441ea3d 100644 (file)
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -1,14 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6SX Sabresd board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "mx6_common.h"
 
 #ifdef CONFIG_SPL
@@ -18,7 +19,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
 
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
 #ifdef CONFIG_IMX_BOOTAUX
@@ -55,11 +55,11 @@
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
-       "mmcdev=2\0" \
+       "mmcdev=3\0" \
        "mmcpart=1\0" \
-       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+       "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
+               "root=PARTUUID=${uuid} rootwait rw\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
@@ -67,6 +67,7 @@
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
+               "run finduuid; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
@@ -104,10 +105,13 @@
                        "fi; " \
                "else " \
                        "bootz; " \
-               "fi;\0"
+               "fi;\0" \
+       "findfdt="\
+               "if test test $board_rev = REVA ; then " \
+                       "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
 
 #define CONFIG_BOOTCOMMAND \
-          "mmc dev ${mmcdev};" \
+          "run findfdt; " \
           "mmc dev ${mmcdev}; if mmc rescan; then " \
                   "if run loadbootscript; then " \
                           "run bootscript; " \
@@ -120,11 +124,8 @@
           "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x10000)
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -140,22 +141,14 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC4_BASE_ADDR
 
 /* I2C Configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED             100000
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
 /* Network */
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR          0x1
@@ -163,19 +156,13 @@
 #define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_ETHPRIME                 "FEC"
 
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ATHEROS
-
 #ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #endif
 
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
@@ -185,23 +172,10 @@
 
 #define CONFIG_IMX_THERMAL
 
-#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SYS_FSL_QSPI_LE
-#define CONFIG_SYS_FSL_QSPI_AHB
-#ifdef CONFIG_MX6SX_SABRESD_REVA
-#define FSL_QSPI_FLASH_SIZE            SZ_16M
-#else
-#define FSL_QSPI_FLASH_SIZE            SZ_32M
-#endif
-#define FSL_QSPI_FLASH_NUM             2
-#endif
-
 #ifndef CONFIG_SPL_BUILD
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO
@@ -209,13 +183,6 @@
 #endif
 #endif
 
-#define CONFIG_ENV_OFFSET              (8 * SZ_64K)
-#define CONFIG_ENV_SIZE                        SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
-
 #define CONFIG_SYS_FSL_USDHC_NUM       3
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV         2  /*USDHC4*/
-#endif
 
 #endif                         /* __CONFIG_H */