+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* Configuration settings for the Freescale i.MX6Q SabreSD board.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __MX6QSABRESD_CONFIG_H
-#define __MX6QSABRESD_CONFIG_H
+#ifndef __MX6SABRESD_CONFIG_H
+#define __MX6SABRESD_CONFIG_H
+
+#ifdef CONFIG_SPL
+#include "imx6_spl.h"
+#endif
#define CONFIG_MACH_TYPE 3980
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc0"
-#define CONFIG_MMCROOT "/dev/mmcblk1p2"
-#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb"
-#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
+#define CONSOLE_DEV "ttymxc0"
#include "mx6sabre_common.h"
+/* Falcon Mode */
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
+
+/* Falcon Mode - MMC support: args@1MB kernel@2MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
+
#define CONFIG_SYS_FSL_USDHC_NUM 3
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */
+
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
+#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19)
+#endif
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+
+/* USB Configs */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */
#endif
-#endif /* __MX6QSABRESD_CONFIG_H */
+#endif /* __MX6SABRESD_CONFIG_H */