global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG

[platform/kernel/u-boot.git] / include / configs / mx6sabresd.h

diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index a8c0e03..2b028e3 100644 (file)
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -1,74 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreSD board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
-#ifndef __MX6QSABRESD_CONFIG_H
-#define __MX6QSABRESD_CONFIG_H
-
-#ifdef CONFIG_SPL
-#include "imx6_spl.h"
-#endif
+#ifndef __MX6SABRESD_CONFIG_H
+#define __MX6SABRESD_CONFIG_H
 
-#define CONFIG_MACH_TYPE       3980
-#define CONFIG_MXC_UART_BASE   UART1_BASE
+#define CFG_MXC_UART_BASE      UART1_BASE
 #define CONSOLE_DEV            "ttymxc0"
-#define CONFIG_MMCROOT                 "/dev/mmcblk1p2"
-
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 
 #include "mx6sabre_common.h"
 
 /* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME   "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-#define CONFIG_CMD_SPL
-#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
-#define CONFIG_CMD_SPL_WRITE_SIZE      (128 * SZ_1K)
 
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
 
-#define CONFIG_SYS_FSL_USDHC_NUM       3
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV         1       /* SDHC3 */
-#endif
+#define CFG_SYS_FSL_USDHC_NUM  3
 
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(7, 12)
 #define CONFIG_PCIE_IMX_POWER_GPIO     IMX_GPIO_NR(3, 19)
 #endif
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED             100000
-
 /* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS           0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Enabled USB controller number */
+#define CFG_MXC_USB_PORTSC             (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS              0
 #endif
 
-#endif                         /* __MX6QSABRESD_CONFIG_H */
+#endif                         /* __MX6SABRESD_CONFIG_H */