global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG

[platform/kernel/u-boot.git] / include / configs / mx6sabreauto.h

diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index 4b8f9c8..da98139 100644 (file)
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -1,87 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreAuto board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __MX6SABREAUTO_CONFIG_H
 #define __MX6SABREAUTO_CONFIG_H
 
-#ifdef CONFIG_SPL
-#include "imx6_spl.h"
-#endif
-
-#define CONFIG_MACH_TYPE       3529
-#define CONFIG_MXC_UART_BASE   UART4_BASE
+#define CFG_MXC_UART_BASE      UART4_BASE
 #define CONSOLE_DEV            "ttymxc3"
 
 /* USB Configs */
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
-#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS   0
+#define CFG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS      0
 
-#define CONFIG_PCA953X
-#define CONFIG_SYS_I2C_PCA953X_WIDTH   { {0x30, 8}, {0x32, 8}, {0x34, 8} }
+#define CFG_SYS_I2C_PCA953X_WIDTH      { {0x30, 8}, {0x32, 8}, {0x34, 8} }
 
 #include "mx6sabre_common.h"
 
 /* Falcon Mode */
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME   "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
-
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
 #endif
 
 #ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
-#define CONFIG_SYS_FLASH_SECT_SIZE      (128 * 1024)
-#define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256   /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER         /* Use drivers/cfi_flash.c */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
-#endif
-
-#define CONFIG_SYS_FSL_USDHC_NUM       2
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV         0
+#define CFG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
 #endif
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED           100000
+#define CFG_SYS_FSL_USDHC_NUM  2
 
 /* NAND stuff */
-#define CONFIG_NAND_MXS
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CFG_SYS_NAND_BASE           0x40000000
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
 
 /* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
 #endif                         /* __MX6SABREAUTO_CONFIG_H */