powerpc, 8xx: remove support for 8xx

[platform/kernel/u-boot.git] / include / configs / mx6sabre_common.h

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 9dcc64e..9b0fe5a 100644 (file)
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -16,17 +16,11 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -37,9 +31,7 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-#define CONFIG_CMD_SF
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
@@ -47,9 +39,6 @@
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #endif
 
-/* Command definition */
-#define CONFIG_CMD_BMODE
-
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 #define EMMC_ENV \
        "emmcdev=2\0" \
@@ -79,7 +68,7 @@
        "fdt_addr=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
-       "console=" CONFIG_CONSOLE_DEV "\0" \
+       "console=" CONSOLE_DEV "\0" \
        "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
        "dfu_alt_info_spl=spl raw 0x400\0" \
        "dfu_alt_info_img=u-boot raw 0x10000\0" \
@@ -158,6 +147,8 @@
                                        "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
                                "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
                                        "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
+                               "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
+                                       "setenv fdt_file imx6qp-sabresd.dtb; fi; " \
                                "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
                                        "setenv fdt_file imx6q-sabresd.dtb; fi; " \
                                "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
@@ -166,7 +157,6 @@
                                        "echo WARNING: Could not determine dtb to use; fi; " \
                        "fi;\0" \
 
-
 #define CONFIG_BOOTCOMMAND \
        "run findfdt;" \
        "mmc dev ${mmcdev};" \
@@ -187,8 +177,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
-#define CONFIG_STACKSIZE               (128 * 1024)
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -208,52 +196,35 @@
 #define CONFIG_ENV_IS_IN_MMC
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET              (8 * 64 * 1024)
+#define CONFIG_ENV_OFFSET              (768 * 1024)
 #endif
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
+#ifdef CONFIG_MX6DL
+#define CONFIG_IPUV3_CLK 198000000
+#else
+#define CONFIG_IPUV3_CLK 264000000
+#endif
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
 #ifndef CONFIG_SPL
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
 
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
-
-#define CONFIG_G_DNL_VENDOR_NUM                0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER      "FSL"
 
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
-
-/* USB Device Firmware Update support */
-#define CONFIG_CMD_DFU
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_MMC
-#define CONFIG_DFU_SF
 #endif
 
 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */