Merge remote-tracking branch 'u-boot-imx/master'

[kernel/u-boot.git] / include / configs / mx6qsabrelite.h

diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index fbd10d6..b56d7ca 100644 (file)
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -23,14 +23,13 @@
 #define __CONFIG_H
 
 #define CONFIG_MX6Q
-#define CONFIG_SYS_MX6_HCLK           24000000
-#define CONFIG_SYS_MX6_CLK32          32768
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_MACH_TYPE       3769
 
 #include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -38,7 +37,7 @@
 #define CONFIG_REVISION_TAG
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN         (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
@@ -53,18 +52,16 @@
 #define CONFIG_SPI_FLASH_SST
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  0
-#define CONFIG_SF_DEFAULT_CS   (0|(GPIO_NUMBER(3, 19)<<8))
+#define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
 #define CONFIG_SF_DEFAULT_SPEED 25000000
 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
 #endif
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE            I2C3_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED            100000
-#define CONFIG_SYS_I2C_SLAVE            0xfe
+#define CONFIG_SYS_I2C_SPEED           100000
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
@@ -75,6 +72,7 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
@@ -104,6 +102,7 @@
 #define CONFIG_FEC_MXC_PHYADDR         6
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
 
 /* USB Configs */
 #define CONFIG_CMD_USB
@@ -118,6 +117,22 @@
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 
+/* Miscellaneous commands */
+#define CONFIG_CMD_BMODE
+
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX             1
@@ -163,7 +178,7 @@
 
 #define CONFIG_BOOTCOMMAND \
        "mmc dev ${mmcdev};" \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
               "if run loadbootscript; then " \
                       "run bootscript; " \
               "else " \
@@ -195,7 +210,6 @@
 #define CONFIG_SYS_HZ                 1000
 
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE              (128 * 1024)
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS          1
@@ -234,8 +248,6 @@
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
 
-#define CONFIG_SYS_DCACHE_OFF
-
 #ifndef CONFIG_SYS_DCACHE_OFF
 #define CONFIG_CMD_CACHE
 #endif