#include <asm/arch/imx-regs.h>
-#define CONSOLE_DEV "ttymxc0"
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SYS_FSL_CLK
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
-
-#define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000
-
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_REVISION_TAG
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/* Eth Configs */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR 0x1F
-
/* USB Configs */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_SYS_RTC_BUS_NUM 2
-#define CONFIG_SYS_I2C_RTC_ADDR 0x30
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-
-/* PMIC Controller */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_DIALOG_POWER
-#define CONFIG_POWER_FSL
-#define CONFIG_POWER_FSL_MC13892
-#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
-#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
-
/* Command definition */
-#define CONFIG_ETHPRIME "FEC0"
-
-#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
-
#define PPD_CONFIG_NFS \
"nfsserver=192.168.252.95\0" \
"gatewayip=192.168.252.95\0" \
#define CONFIG_EXTRA_ENV_SETTINGS \
PPD_CONFIG_NFS \
"image=/boot/fitImage\0" \
- "fdt_high=0xffffffff\0" \
"dev=mmc\0" \
"devnum=2\0" \
"rootdev=mmcblk0p\0" \
"quiet=quiet loglevel=0\0" \
- "console=" CONSOLE_DEV "\0" \
"lvds=ldb\0" \
"setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
- "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \
- "console=${console} ${rtc_status}\0" \
+ "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \
"bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
"rootwait ${bootargs}\0" \
- "doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
- "then setenv quiet; fi\0" \
- "hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
- "/boot/bootcause/firstboot\0" \
- "swappartitions=setexpr partnum 3 - ${partnum}\0" \
+ "doquiet=" \
+ "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
+ "then setenv quiet; fi\0" \
+ "hasfirstboot=" \
+ "test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
+ "swappartitions=" \
+ "setexpr partnum 3 - ${partnum}\0" \
"failbootcmd=" \
- "ppd_lcd_enable; " \
- "msg=\"Monitor failed to start. " \
- "Try again, or contact GE Service for support.\"; " \
- "echo $msg; " \
- "setenv stdout vga; " \
- "echo \"\n\n\n\n \" $msg; " \
- "setenv stdout serial; " \
- "mw.b 0x7000A000 0xbc; " \
- "mw.b 0x7000A001 0x00; " \
- "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
+ "cls; " \
+ "setcurs 5 4; " \
+ "lcdputs \"Monitor failed to start. " \
+ "Try again, or contact GE Service for support.\"; " \
+ "bootcount reset; " \
+ "while true; do sleep 1; done; \0" \
"altbootcmd=" \
"run doquiet; " \
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
"run hasfirstboot || setenv partnum 0; " \
"if test ${partnum} != 0; then " \
- "setenv bootcause REVERT; " \
"run swappartitions loadimage doboot; " \
"fi; " \
"run failbootcmd\0" \
"video-mode=" \
"lcd:800x480-24@60,monitor=lcd\0" \
-#define CONFIG_MMCBOOTCOMMAND \
- "if mmc dev ${devnum}; then " \
- "run doquiet; " \
- "run tryboot; " \
- "fi; " \
-
-#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
-
-#define CONFIG_ARP_TIMEOUT 200UL
-
/* Miscellaneous configurable options */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS 48 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START 0x70000000
-#define CONFIG_SYS_MEMTEST_END 0x70010000
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
/* Physical Memory Map */
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* FLASH and environment organization */
-#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
-#define CONFIG_ENV_SIZE (10 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_CMD_FUSE
#define CONFIG_FSL_IIM
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* I2C1 */
-#define CONFIG_SYS_NUM_I2C_BUSES 9
-#define CONFIG_SYS_I2C_MAX_HOPS 1
-#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
- }
-
-#define CONFIG_BCH
-
/* Backlight Control */
-#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66666000
+#define CONFIG_IMX_VIDEO_SKIP
+
#endif /* __CONFIG_H */