imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h

[platform/kernel/u-boot.git] / include / configs / mx51evk.h

diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 49f88c2..95afb35 100644 (file)
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -12,21 +12,8 @@
 
  /* High Level Configuration Options */
 
-#define CONFIG_SYS_FSL_CLK
-
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-#define CONFIG_MACH_TYPE       MACH_TYPE_MX51_BABBAGE
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
-
 /*
  * Hardware drivers
  */
@@ -35,7 +22,6 @@
 #define CONFIG_MXC_UART_BASE   UART1_BASE
 
 /* PMIC Controller */
-#define CONFIG_POWER
 #define CONFIG_POWER_SPI
 #define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS    0
@@ -48,16 +34,7 @@
 /*
  * MMC Configs
  * */
-#define CONFIG_SYS_FSL_ESDHC_ADDR      MMC_SDHC1_BASE_ADDR
-#define CONFIG_SYS_FSL_ESDHC_NUM       2
-
-/*
- * Eth Configs
- */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE   FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR 0x1F
+#define CFG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR
 
 /* USB Configs */
 #define CONFIG_MXC_USB_PORT    1
@@ -65,11 +42,6 @@
 #define CONFIG_MXC_USB_FLAGS   MXC_EHCI_POWER_PINS_ENABLED
 
 /* Framebuffer and LCD */
-#define CONFIG_VIDEO_LOGO
-
-#define CONFIG_ETHPRIME                "FEC0"
-
-#define CONFIG_LOADADDR                0x92000000      /* loadaddr env var */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
@@ -130,26 +102,10 @@
                        "bootz; " \
                "fi;\0"
 
-#define CONFIG_BOOTCOMMAND \
-       "mmc dev ${mmcdev}; if mmc rescan; then " \
-               "if run loadbootscript; then " \
-                       "run bootscript; " \
-               "else " \
-                       "if run loadimage; then " \
-                               "run mmcboot; " \
-                       "else run netboot; " \
-                       "fi; " \
-               "fi; " \
-       "else run netboot; fi"
-
-#define CONFIG_ARP_TIMEOUT     200UL
-
 /*
  * Miscellaneous configurable options
  */
 
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -160,11 +116,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       (IRAM_BASE_ADDR)
 #define CONFIG_SYS_INIT_RAM_SIZE       (IRAM_SIZE)
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 #define CONFIG_SYS_DDR_CLKSEL  0
 #define CONFIG_SYS_CLKTL_CBCDR 0x59E35100
 #define CONFIG_SYS_MAIN_PWR_ON
@@ -173,17 +124,4 @@
  * environment organization
  */
 
-/*
- * Environment starts at CONFIG_ENV_OFFSET=0xC0000 = 768k = 768 * 1024 = 786432
- *
- * Detect overlap between U-Boot image and environment area in build-time
- *
- * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
- * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
- *
- * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- * write the direct value here
- */
-#define CONFIG_BOARD_SIZE_LIMIT                785408
-
 #endif