mx31: Define default SoC input clock frequencies

[platform/kernel/u-boot.git] / include / configs / mx31pdk.h

diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index d019e96..b272674 100644 (file)
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -33,17 +33,17 @@
 #include <asm/arch/imx-regs.h>
 
 /* High Level Configuration Options */
-#define CONFIG_ARM1136         1       /* This is an arm1136 CPU core */
-#define CONFIG_MX31            1       /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ  26000000
-#define CONFIG_MX31_CLK32      32768
+#define CONFIG_ARM1136                 /* This is an arm1136 CPU core */
+#define CONFIG_MX31                    /* in a mx31 */
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS       1
-#define CONFIG_INITRD_TAG              1
+#define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_MACH_TYPE       MACH_TYPE_MX31_3DS
 
 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_SKIP_LOWLEVEL_INIT
@@ -58,27 +58,31 @@
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART                1
-#define CONFIG_SYS_MX31_UART1  1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE   UART1_BASE
 #define CONFIG_HW_WATCHDOG
+#define CONFIG_MXC_GPIO
 
-#define CONFIG_HARD_SPI                1
-#define CONFIG_MXC_SPI         1
+#define CONFIG_HARD_SPI
+#define CONFIG_MXC_SPI
 #define CONFIG_DEFAULT_SPI_BUS 1
 #define CONFIG_DEFAULT_SPI_MODE        (SPI_MODE_0 | SPI_CS_HIGH)
 
-#define CONFIG_FSL_PMIC
+/* PMIC Controller */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS    1
 #define CONFIG_FSL_PMIC_CS     2
 #define CONFIG_FSL_PMIC_CLK    1000000
 #define CONFIG_FSL_PMIC_MODE   (SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783     1
+#define CONFIG_FSL_PMIC_BITLEN 32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -88,9 +92,11 @@
 
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_BOOTZ
 
 /*
  * Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require
@@ -98,7 +104,7 @@
  */
 #undef CONFIG_CMD_IMLS
 
-#define BOARD_LATE_INIT
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY       3
 
@@ -113,16 +119,15 @@
                "nand erase 0x0 0x40000; "                              \
                "nand write 0x81000000 0x0 0x40000\0"
 
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC911X         1
+#define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE    0xB6000000
-#define CONFIG_SMC911X_32_BIT  1
+#define CONFIG_SMC911X_32_BIT
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_SYS_PROMPT      "uboot> "
+#define CONFIG_SYS_PROMPT      "MX31PDK U-Boot > "
 #define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
@@ -134,21 +139,14 @@
 
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x10000
+#define CONFIG_SYS_MEMTEST_END         0x80010000
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR           0x81000000
 
 #define CONFIG_SYS_HZ                  1000
 
-#define CONFIG_CMDLINE_EDITING 1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024) /* regular stack */
+#define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -156,21 +154,23 @@
 #define CONFIG_NR_DRAM_BANKS   1
 #define PHYS_SDRAM_1           CSD0_BASE
 #define PHYS_SDRAM_1_SIZE      (128 * 1024 * 1024)
-#define CONFIG_BOARD_EARLY_INIT_F      1
+#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
+                                               GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_INIT_RAM_ADDR + \
+                                               CONFIG_SYS_GBL_DATA_OFFSET)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 /* No NOR flash present */
-#define CONFIG_SYS_NO_FLASH    1
+#define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ENV_IS_IN_NAND          1
+#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              0x40000
 #define CONFIG_ENV_OFFSET_REDUND       0x60000
 #define CONFIG_ENV_SIZE                        (128 * 1024)