imx: mx7: spl: fix CONFIG_SPL_MAX_SIZE definition

[platform/kernel/u-boot.git] / include / configs / mvebu_armada-8k.h

diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index f691663..2f8be2e 100644 (file)
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
@@ -12,72 +11,32 @@
  */
 #define CONFIG_SYS_TCLK                250000000       /* 250MHz */
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE  0x00000000
 
-#define CONFIG_NR_DRAM_BANKS   1
-
 /* auto boot */
-#define CONFIG_PREBOOT
 
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, \
                                          115200, 230400, 460800, 921600 }
 
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG              /* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS       /* enable memory tag */
-
 #define        CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  (4 << 20) /* 4MiB for malloc() */
-
-/*
  * Other required minimal configurations
  */
-#define CONFIG_ARCH_CPU_INIT           /* call arch_cpu_init() */
-#define CONFIG_SYS_LOAD_ADDR   0x00800000      /* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00800000    /* 8M */
-#define CONFIG_SYS_MEMTEST_END 0x00ffffff      /*(_16M -1) */
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000    /* Rst Vector Adr */
 #define CONFIG_SYS_MAXARGS     32      /* max number of command args */
 
 /* End of 16M scrubbed by training in bootrom */
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
 
-/*
- * SPI Flash configuration
- */
-#define CONFIG_ENV_SPI_BUS             0
-#define CONFIG_ENV_SPI_CS              0
-
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED                1000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
-#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
-
-#define CONFIG_ENV_OFFSET              0x180000 /* as Marvell U-Boot version */
-#define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
+/* When runtime detection fails this is the default */
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_MAX_CHIPS      1
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
 /*
  * Ethernet Driver configuration
  */
-#define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
 #define CONFIG_ARP_TIMEOUT     200
 #define CONFIG_NET_RETRY_COUNT 50
 
@@ -115,11 +74,11 @@
 #include <config_distro_bootcmd.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS      \
-       "scriptaddr=0x4d00000\0"        \
-       "pxefile_addr_r=0x4e00000\0"    \
-       "fdt_addr_r=0x4f00000\0"        \
-       "kernel_addr_r=0x5000000\0"     \
-       "ramdisk_addr_r=0x8000000\0"    \
+       "scriptaddr=0x6d00000\0"        \
+       "pxefile_addr_r=0x6e00000\0"    \
+       "fdt_addr_r=0x6f00000\0"        \
+       "kernel_addr_r=0x7000000\0"     \
+       "ramdisk_addr_r=0xa000000\0"    \
        "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
        BOOTENV