#ifndef _CONFIG_MVEBU_ARMADA_37XX_H
#define _CONFIG_MVEBU_ARMADA_37XX_H
+#include <linux/sizes.h>
+
/*
* High Level Configuration Options (easy to change)
*/
/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
-/* auto boot */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400, 460800, 921600 }
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_INITRD_TAG /* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
-
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
+#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
+#define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \
+ 9600, 19200, 38400, 57600, 115200, \
+ 230400, 460800, 500000, 576000, \
+ 921600, 1000000, 1152000, 1500000, \
+ 2000000, 2500000, 3000000, 3500000, \
+ 4000000, 4500000, 5000000, 5500000, \
+ 6000000 }
/*
* Other required minimal configurations
*/
-#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-
-/* End of 16M scrubbed by training in bootrom */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
-
-/*
- * I2C
- */
-#define CONFIG_I2C_MV
-#define CONFIG_SYS_I2C_SLAVE 0x0
/*
- * SPI Flash configuration
+ * Environment
*/
-
-#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
-
-/* Environment in SPI NOR flash */
-
-/*
- * Ethernet Driver configuration
- */
-#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
-#define CONFIG_ARP_TIMEOUT 200
-#define CONFIG_NET_RETRY_COUNT 50
+#define DEFAULT_ENV_IS_RW /* required for configuring default fdtfile= */
#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
-/* USB ethernet */
-
-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_LBA48
-#define CONFIG_SYS_64BIT_LBA
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
-#define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
- CONFIG_SYS_SCSI_MAX_LUN)
-
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
#include <config_distro_bootcmd.h>
+/* filler for default values filled by board_early_init_f() */
+#define ENV_RW_FILLER \
+ "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for ethaddr= */ \
+ "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth1addr= */ \
+ "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth2addr= */ \
+ "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth3addr= */ \
+ "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for fdtfile= */ \
+ ""
+
+/* fdt_addr and kernel_addr are needed for existing distribution boot scripts */
#define CONFIG_EXTRA_ENV_SETTINGS \
- "scriptaddr=0x4d00000\0" \
- "pxefile_addr_r=0x4e00000\0" \
- "fdt_addr_r=0x4f00000\0" \
- "kernel_addr_r=0x5000000\0" \
- "ramdisk_addr_r=0x8000000\0" \
- BOOTENV
+ "scriptaddr=0x6d00000\0" \
+ "pxefile_addr_r=0x6e00000\0" \
+ "fdt_addr=0x6f00000\0" \
+ "fdt_addr_r=0x6f00000\0" \
+ "kernel_addr=0x7000000\0" \
+ "kernel_addr_r=0x7000000\0" \
+ "ramdisk_addr_r=0xa000000\0" \
+ BOOTENV \
+ ENV_RW_FILLER
#endif /* _CONFIG_MVEBU_ARMADA_37XX_H */