+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2010
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
/*
#ifndef _MV_COMMON_H
#define _MV_COMMON_H
+#include <linux/stringify.h>
+
/*
* High Level Configuration Options (easy to change)
*/
-#define CONFIG_MARVELL 1
/*
- * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h
+ * Custom CONFIG_TEXT_BASE can be done in <board>.h
*/
/* additions for new ARM relocation support */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-/*
- * CLKs configurations
- */
+#define CFG_SYS_SDRAM_BASE 0x00000000
/*
* NS16550 Configuration
*/
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
-#if !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE
+#define CFG_SYS_NS16550_CLK CFG_SYS_TCLK
+#if !CONFIG_IS_ENABLED(DM_SERIAL)
+#define CFG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE
#endif
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
+#if defined(CONFIG_ARMADA_38X) && !defined(CFG_SYS_BAUDRATE_TABLE)
+#define CFG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \
+ 9600, 19200, 38400, 57600, 115200, \
+ 230400, 460800, 500000, 576000, \
+ 921600, 1000000, 1152000, 1500000, \
+ 2000000, 2500000, 3125000, 4000000, \
+ 5200000 }
+#endif
-#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200,230400, 460800, 921600 }
/* auto boot */
-#define CONFIG_PREBOOT
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
-
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 * 4) /* 4MiB for malloc() */
/*
* Other required minimal configurations
*/
-#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
-#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
-#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
/* ====> Include platform Common Definitions */
#include <asm/arch/config.h>
-/*
- * DRAM Banks configuration, Custom config can be done in <board>.h
- */
-#ifndef CONFIG_NR_DRAM_BANKS
-#define CONFIG_NR_DRAM_BANKS CONFIG_NR_DRAM_BANKS_MAX
-#else
-#if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX)
-#error CONFIG_NR_DRAM_BANKS Configurated more than available
-#endif
-#endif /* CONFIG_NR_DRAM_BANKS */
-
/* ====> Include driver Common Definitions */
/*
* Common NAND configuration
*/
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#endif
-
-/*
- * Common SPI Flash configuration
- */
-#ifdef CONFIG_CMD_SF
-#endif
-
-/*
- * File system
- */
-#ifdef CONFIG_SYS_MVFS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#endif
#endif /* _MV_COMMON_H */