sh: tmu: Clean up CONFIG_SYS_TMU_CLK_DIV

[platform/kernel/u-boot.git] / include / configs / ms7722se.h

diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index a757737..8a5fa97 100644 (file)
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -1,33 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Hitachi Solution Engine 7722
  *
  * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __MS7722SE_H
 #define __MS7722SE_H
 
-#define CONFIG_SH              1
-#define CONFIG_SH4             1
 #define CONFIG_CPU_SH7722      1
-#define CONFIG_MS7722SE                1
-
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_SAVEENV
-
-#define CONFIG_BAUDRATE                115200
-#define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTARGS                "console=ttySC0,115200 root=1f01"
-
-#define CONFIG_VERSION_VARIABLE
+
+#define CONFIG_DISPLAY_BOARDINFO
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /* SMC9111 */
@@ -39,26 +22,15 @@
 #define MS7722SE_FLASH_BASE_1  (0xA0000000)
 #define MS7722SE_FLASH_BANK_SIZE       (8*1024 * 1024)
 
-#define CONFIG_SYS_TEXT_BASE   0x8FFC0000
-#define CONFIG_SYS_LONGHELP                            /* undef to save memory */
-#define CONFIG_SYS_PROMPT              "=> "           /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              256             /* Buffer size for input from the Console */
 #define CONFIG_SYS_PBSIZE              256             /* Buffer size for Console output */
-#define CONFIG_SYS_MAXARGS             16              /* max args accepted for monitor commands */
-#define CONFIG_SYS_BARGSIZE            512             /* Buffer size for Boot Arguments passed to kernel */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 115200 }      /* List of legal baudrate settings for this board */
 
 /* SCIF */
-#define CONFIG_SCIF_CONSOLE    1
 #define CONFIG_CONS_SCIF0      1
-#undef  CONFIG_SYS_CONSOLE_INFO_QUIET                  /* Suppress display of console information at boot */
-#undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
 #define CONFIG_SYS_MEMTEST_START       (MS7722SE_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
 
-#undef  CONFIG_SYS_ALT_MEMTEST         /* Enable alternate, more extensive, memory test */
 #undef  CONFIG_SYS_MEMTEST_SCRATCH     /* Scratch address used by the alternate memory test */
 
 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE   /* Enable temporary baudrate change while serial download */
@@ -100,7 +72,6 @@
 
 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP
 
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE   1
 #define CONFIG_ENV_SECT_SIZE   (8 * 1024)
 #define CONFIG_ENV_SIZE                (CONFIG_ENV_SECT_SIZE)
@@ -111,7 +82,7 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ    33333333
-#define CONFIG_SYS_TMU_CLK_DIV         (4)     /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ          1000
+#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
 
 #endif /* __MS7722SE_H */