CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there

[platform/kernel/u-boot.git] / include / configs / mpc7448hpc2.h

diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index a1783b2..c0c95ed 100644 (file)
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -42,16 +42,22 @@
 #define CONFIG_HIGH_BATS       /* High BATs supported */
 #define CONFIG_ALTIVEC         /* undef to disable */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFF000000
+
 #define CONFIG_SYS_BOARD_NAME          "MPC7448 HPC II"
 #define CONFIG_IDENT_STRING    " Freescale MPC7448 HPC II"
 
 #define CONFIG_SYS_OCN_CLK             133000000       /* 133 MHz */
-#define CONFIG_SYS_CONFIG_BUS_CLK      133000000
+#define CONFIG_SYS_BUS_CLK             133000000
 
 #define CONFIG_SYS_CLK_SPREAD          /* Enable Spread-Spectrum Clock generation */
 
 #undef  CONFIG_ECC             /* disable ECC support */
 
+#ifndef __ASSEMBLY__
+#include <galileo/core.h>
+#endif
+
 /* Board-specific Initialization Functions to be called */
 #define CONFIG_SYS_BOARD_ASM_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -79,7 +85,6 @@
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
-#define OF_CPU                 "PowerPC,7448@0"
 #define OF_TSI                 "tsi108@c0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 8)
 #define OF_STDOUT_PATH         "/tsi108@c0000000/serial@7808"
@@ -102,7 +107,6 @@
 
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08)
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds */
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -124,14 +128,11 @@
 
 /* Networking Configuration */
 
-#define KSEG1ADDR(a)   (a)     /* Needed by the rtl8139 driver */
-
 #define CONFIG_TSI108_ETH
 #define CONFIG_TSI108_ETH_NUM_PORTS    2
 
-#define CONFIG_NET_MULTI
 
-#define CONFIG_BOOTFILE                zImage.initrd.elf
+#define CONFIG_BOOTFILE                "zImage.initrd.elf"
 #define CONFIG_LOADADDR                0x400000
 
 /*-------------------------------------------------------------------------- */
@@ -179,6 +180,7 @@
  */
 #define CONFIG_VERSION_VARIABLE                1
 #define CONFIG_TSI108_I2C
+#define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* I2C EEPROM page 1 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1       /* Bytes of address */
@@ -221,10 +223,9 @@
  */
 #undef  CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0x07d00000      /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_END        0x4000/* larger space - we have SDRAM initialized */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x4000/* larger space - we have SDRAM initialized */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128/* size in bytes reserved for init data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -253,7 +254,7 @@
 
 #define CONFIG_SYS_RESET_ADDRESS       0x3fffff00
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* u-boot code base */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* u-boot code base */
 #define CONFIG_SYS_MALLOC_LEN          (256 << 10)     /* Reserve 256 kB for malloc */
 
 /* Peripheral Device section */
@@ -302,8 +303,6 @@
 
 #define CONFIG_SYS_PCI_IO_SIZE         0x01000000      /* 16MB */
 
-#define _IO_BASE               0x00000000      /* points to PCI I/O space      */
-
 /* PCI Config Space mapping */
 #define CONFIG_SYS_PCI_CFG_BASE        0xfb000000      /* Changed from FE000000 */
 #define CONFIG_SYS_PCI_CFG_SIZE        0x01000000      /* 16MB */
@@ -403,13 +402,5 @@
 
 #define L2_INIT                0
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
 #define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION
 #endif /* __CONFIG_H */