Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

[platform/kernel/u-boot.git] / include / configs / mpc5121ads.h

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index fb49388..cbfcb70 100644 (file)
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -47,14 +47,18 @@
 #define CONFIG_E300            1       /* E300 Family */
 #define CONFIG_MPC512X         1       /* MPC512X family */
 #define CONFIG_FSL_DIU_FB      1       /* FSL DIU */
-#undef CONFIG_FSL_DIU_LOGO_BMP         /* Don't include FSL DIU binary bmp */
+
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
 
 /* video */
 #undef CONFIG_VIDEO
 
-#if defined(CONFIG_VIDEO)
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
 #endif
 
 /* CONFIG_PCI is defined at config time */
@@ -85,6 +89,9 @@
 #endif
 #define CONFIG_SYS_DDR_BASE            0x00000000      /* DDR is system memory*/
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_MAX_RAM_SIZE                0x20000000
+
+#define CONFIG_SYS_IOCTRL_MUX_DDR      0x00000036
 
 /* DDR Controller Configuration
  *
@@ -263,13 +270,13 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_SRAM_BASE            /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_SRAM_SIZE            /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_SRAM_SIZE            /* Size of used area in RAM */
 
 #define CONFIG_SYS_GBL_DATA_SIZE       0x100                   /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE               /* Start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE            /* Start of monitor */
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)            /* Reserve 512 kB for Mon */
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_MALLOC_LEN          (6 * 1024 * 1024)       /* Reserved for malloc */
@@ -281,7 +288,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX     1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 
 /*
  * Serial console configuration
@@ -371,6 +377,20 @@
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68    /* at address 0x68              */
 
 /*
+ * USB  Support
+ */
+#define CONFIG_CMD_USB
+
+#if defined(CONFIG_CMD_USB)
+#define CONFIG_USB_EHCI                                /* Enable EHCI Support  */
+#define CONFIG_USB_EHCI_FSL                    /* On a FSL platform    */
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN            /* With big-endian regs */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
+/*
  * Environment
  */
 #define CONFIG_ENV_IS_IN_FLASH 1
@@ -438,10 +458,15 @@
                                        "mpc5121.nand:-(data)"
 
 
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
+#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
+
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION
+
+#define CONFIG_CMD_FAT
+#define CONFIG_SUPPORT_VFAT
+
 #endif /* defined(CONFIG_CMD_IDE) */
 
 /*
@@ -474,10 +499,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Initial Memory map for Linux*/
 
 /* Cache Configuration */
 #define CONFIG_SYS_DCACHE_SIZE         32768
@@ -492,14 +517,6 @@
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */