Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

[platform/kernel/u-boot.git] / include / configs / mpc5121ads.h

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 07e7747..cbfcb70 100644 (file)
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -48,6 +48,8 @@
 #define CONFIG_MPC512X         1       /* MPC512X family */
 #define CONFIG_FSL_DIU_FB      1       /* FSL DIU */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
+
 /* video */
 #undef CONFIG_VIDEO
 
@@ -268,10 +270,10 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_SRAM_BASE            /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_SRAM_SIZE            /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_SRAM_SIZE            /* Size of used area in RAM */
 
 #define CONFIG_SYS_GBL_DATA_SIZE       0x100                   /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE            /* Start of monitor */
@@ -375,6 +377,20 @@
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68    /* at address 0x68              */
 
 /*
+ * USB  Support
+ */
+#define CONFIG_CMD_USB
+
+#if defined(CONFIG_CMD_USB)
+#define CONFIG_USB_EHCI                                /* Enable EHCI Support  */
+#define CONFIG_USB_EHCI_FSL                    /* On a FSL platform    */
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN            /* With big-endian regs */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
+/*
  * Environment
  */
 #define CONFIG_ENV_IS_IN_FLASH 1
@@ -442,10 +458,15 @@
                                        "mpc5121.nand:-(data)"
 
 
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
+#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
+
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION
+
+#define CONFIG_CMD_FAT
+#define CONFIG_SUPPORT_VFAT
+
 #endif /* defined(CONFIG_CMD_IDE) */
 
 /*
@@ -496,14 +517,6 @@
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */