Merge branch 'agust@denx.de-next' of git://git.denx.de/u-boot-staging

[platform/kernel/u-boot.git] / include / configs / mpc5121ads.h

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 19006ac..3f55d35 100644 (file)
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -46,16 +46,16 @@
  */
 #define CONFIG_E300            1       /* E300 Family */
 #define CONFIG_MPC512X         1       /* MPC512X family */
-#define CONFIG_FSL_DIU_FB      1       /* FSL DIU */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF00000
 
 /* video */
-#undef CONFIG_VIDEO
-
-#ifdef CONFIG_VIDEO
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_IMMR + 0x2100)
+#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
 #define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
@@ -74,7 +74,6 @@
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_IMMR                0x80000000
-#define CONFIG_SYS_DIU_ADDR            (CONFIG_SYS_IMMR+0x2100)
 
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest region */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
@@ -243,7 +242,6 @@
 #define CONFIG_SYS_NAND_BASE            0x40000000
 
 #define CONFIG_SYS_MAX_NAND_DEVICE      2
-#define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_NAND_SELECT_DEVICE  /* driver supports mutipl. chips */
 
 /*
@@ -270,10 +268,9 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_SRAM_BASE            /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_SRAM_SIZE            /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_SRAM_SIZE            /* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100                   /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE            /* Start of monitor */
@@ -293,6 +290,7 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE     3       /* console is on PSC3 */
+#define CONFIG_SYS_PSC3
 #if CONFIG_PSC_CONSOLE != 3
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
@@ -309,7 +307,6 @@
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -364,7 +361,6 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC     1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                0x1
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_FEC_AN_TIMEOUT  1
@@ -517,14 +513,6 @@
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
@@ -536,8 +524,8 @@
 #define CONFIG_TIMESTAMP
 
 #define CONFIG_HOSTNAME                mpc5121ads
-#define CONFIG_BOOTFILE                mpc5121ads/uImage
-#define CONFIG_ROOTPATH                /opt/eldk/ppc_6xx
+#define CONFIG_BOOTFILE                "mpc5121ads/uImage"
+#define CONFIG_ROOTPATH                "/opt/eldk/ppc_6xx"
 
 #define CONFIG_LOADADDR                400000  /* default location for tftp and bootm */