sh: Remove config.mk for ap325rxa board

[platform/kernel/u-boot.git] / include / configs / mp2usb.h

diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 9ac7e9a..8e398d7 100644 (file)
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -28,6 +28,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK       179712000       /* from 18.432 MHz crystal (18432000 / 4 * 45) */
 #define AT91C_MASTER_CLOCK     (AT91C_MAIN_CLOCK/3)    /* peripheral clock */
@@ -49,11 +51,6 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
 /* flash */
-#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
-#define CONFIG_SYS_MC_PUP_VAL  0x00000000
-#define CONFIG_SYS_MC_PUER_VAL 0x00000000
-#define CONFIG_SYS_MC_ASR_VAL  0x00000000
-#define CONFIG_SYS_MC_AASR_VAL 0x00000000
 #define CONFIG_SYS_EBI_CFGR_VAL        0x00000000
 #define CONFIG_SYS_SMC_CSR0_VAL        0x00003084 /* 16bit, 2 TDF, 4 WS */
 
@@ -76,15 +73,12 @@
 #define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
 #define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
 #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#else
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 
 #define CONFIG_BAUDRATE                115200
 
@@ -95,6 +89,7 @@
  */
 
 /* define one of these to choose the DBGU, USART0  or USART1 as console */
+#define CONFIG_AT91RM9200_USART
 #define CONFIG_DBGU
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -163,15 +158,15 @@
 
 #else
 
-    #define CONFIG_CMD_USB
     #define CONFIG_CMD_CACHE
+    #define CONFIG_CMD_USB
 
-    #undef CONFIG_CMD_AUTOSCRIPT
     #undef CONFIG_CMD_BDI
     #undef CONFIG_CMD_FPGA
     #undef CONFIG_CMD_IMI
     #undef CONFIG_CMD_LOADS
     #undef CONFIG_CMD_MISC
+    #undef CONFIG_CMD_SOURCE
 
 #endif
 
@@ -185,7 +180,13 @@
 #define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END         CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI               1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC         1
+#define CONFIG_SYS_RX_ETH_BUFFER       8
+#else
+#define CONFIG_DRIVER_ETHER            1
+#endif
 #define CONFIG_NET_RETRY_COUNT         20
 #undef CONFIG_AT91C_USE_RMII
 
@@ -215,7 +216,7 @@
 #define CONFIG_SYS_MAXARGS             32              /* max number of command args */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 
-#define CONFIG_SYS_DEVICE_DEREGISTER           /* needs device_deregister */
+#define CONFIG_SYS_STDIO_DEREGISTER           /* needs stdio_deregister */
 
 #define CONFIG_SYS_HZ 1000
 #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2)     /* AT91C_TC0_CMR is implicitly set to */