*
* Configuration settings for the AVR32 Network Gateway
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
-#include <asm/arch/memory-map.h>
-
-#define CONFIG_AVR32 1
-#define CONFIG_AT32AP 1
-#define CONFIG_AT32AP7000 1
-#define CONFIG_MIMC200 1
+#include <asm/arch/hardware.h>
-#define CONFIG_MIMC200_EXT_FLASH 1
+#define CONFIG_AVR32
+#define CONFIG_AT32AP
+#define CONFIG_AT32AP7000
+#define CONFIG_MIMC200
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_MIMC200_EXT_FLASH
/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
* and the PBA bus to run at 1/4 the PLL frequency.
*/
-#define CONFIG_PLL 1
-#define CONFIG_SYS_POWER_MANAGER 1
+#define CONFIG_PLL
+#define CONFIG_SYS_POWER_MANAGER
#define CONFIG_SYS_OSC0_HZ 10000000
#define CONFIG_SYS_PLL0_DIV 1
#define CONFIG_SYS_PLL0_MUL 15
#define CONFIG_SYS_CLKDIV_PBA 2
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM, NOR flash and FRAM */
+#define CONFIG_SYS_NR_VM_REGIONS 3
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
*/
#define CONFIG_SYS_PLL0_OPT 0x04
-#define CONFIG_USART1 1
+#define CONFIG_USART_BASE ATMEL_BASE_USART1
+#define CONFIG_USART_ID 1
+
#define CONFIG_MIMC200_DBGLINK 1
/* User serviceable stuff */
-#define CONFIG_DOS_PARTITION 1
+#define CONFIG_DOS_PARTITION
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
#define CONFIG_STACKSIZE (2048)
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
- "root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS1"
+ "root=/dev/mtdblock1 rootfstype=jffs2 fbmem=512k console=ttyS1"
#define CONFIG_BOOTCOMMAND \
"fsload boot/uImage; bootm"
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-#define CONFIG_DISABLE_CONSOLE 1 /* disable console */
-#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
+#define CONFIG_SILENT_CONSOLE /* enable silent startup */
+#define CONFIG_DISABLE_CONSOLE /* disable console */
+#define CONFIG_SYS_DEVICE_NULLDEV /* include nulldev device */
+
+#define CONFIG_LCD 1
/*
* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
* data on the serial line may interrupt the boot sequence.
*/
#define CONFIG_BOOTDELAY 0
-#define CONFIG_ZERO_BOOTDELAY_CHECK 1
-#define CONFIG_AUTOBOOT 1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_AUTOBOOT
/*
* After booting the board for the first time, new ethernet addresses
* should be generated and assigned to the environment variables
* "ethaddr" and "eth1addr". This is normally done during production.
*/
-#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
-#define CONFIG_NET_MULTI 1
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
/*
* BOOTP/DHCP options
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_DOS_PARTITION 1
-
/*
* Command line configuration.
*/
#define CONFIG_CMD_MMC
#define CONFIG_CMD_NET
-#define CONFIG_ATMEL_USART 1
-#define CONFIG_MACB 1
-#define CONFIG_PORTMUX_PIO 1
+#define CONFIG_ATMEL_USART
+#define CONFIG_MACB
+#define CONFIG_PORTMUX_PIO
#define CONFIG_SYS_NR_PIOS 5
-#define CONFIG_SYS_HSDRAMC 1
-#define CONFIG_MMC 1
-#define CONFIG_ATMEL_MCI 1
+#define CONFIG_SYS_HSDRAMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define CONFIG_GENERIC_MMC
+
+#if defined(CONFIG_LCD)
+#define CONFIG_CMD_BMP
+#define CONFIG_ATMEL_LCD 1
+#define LCD_BPP LCD_COLOR16
+#define CONFIG_BMP_16BPP 1
+#define CONFIG_FB_ADDR 0x10600000
+#define CONFIG_WHITE_ON_BLACK 1
+#define CONFIG_VIDEO_BMP_GZIP 1
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE 262144
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+#define CONFIG_SPLASH_SCREEN 1
+#endif
#define CONFIG_SYS_DCACHE_LINESZ 32
#define CONFIG_SYS_ICACHE_LINESZ 32
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE 0x00000000
#define CONFIG_SYS_FLASH_SIZE 0x800000
#define CONFIG_SYS_MAX_FLASH_SECT 135
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_TEXT_BASE 0x00000000
#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
#define CONFIG_SYS_FRAM_BASE 0x08000000
#define CONFIG_SYS_FRAM_SIZE 0x20000
-#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SIZE 65536
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)