*
* Michal SIMEK <monstr@monstr.eu>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#include "../board/xilinx/microblaze-generic/xparameters.h"
/* MicroBlaze CPU */
-#define CONFIG_MICROBLAZE 1
#define MICROBLAZE_V5 1
+/* linear and spi flash memory */
+#ifdef XILINX_FLASH_START
+#define FLASH
+#undef SPIFLASH
+#undef RAMENV /* hold environment in flash */
+#else
+#ifdef XILINX_SPI_FLASH_BASEADDR
+#undef FLASH
+#define SPIFLASH
+#undef RAMENV /* hold environment in flash */
+#else
+#undef FLASH
+#undef SPIFLASH
+#define RAMENV /* hold environment in RAM */
+#endif
+#endif
+
/* uart */
#ifdef XILINX_UARTLITE_BASEADDR
# define CONFIG_XILINX_UARTLITE
# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
#elif XILINX_UART16550_BASEADDR
-# define CONFIG_SYS_NS16550 1
# define CONFIG_SYS_NS16550_SERIAL
-# define CONFIG_SYS_NS16550_REG_SIZE -4
+# if defined(__MICROBLAZEEL__)
+# define CONFIG_SYS_NS16550_REG_SIZE -4
+# else
+# define CONFIG_SYS_NS16550_REG_SIZE 4
+# endif
# define CONFIG_CONS_INDEX 1
# define CONFIG_SYS_NS16550_COM1 \
- (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
+ ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
# define CONFIG_BAUDRATE 115200
/* ethernet */
#undef CONFIG_SYS_ENET
-#ifdef XILINX_EMACLITE_BASEADDR
-# define CONFIG_XILINX_EMACLITE 1
+#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL)
+# define CONFIG_XILINX_EMACLITE 1
+# define CONFIG_SYS_ENET
+#endif
+#if defined(XILINX_LLTEMAC_BASEADDR)
+# define CONFIG_XILINX_LL_TEMAC 1
# define CONFIG_SYS_ENET
-#elif XILINX_LLTEMAC_BASEADDR
-# define CONFIG_XILINX_LL_TEMAC 1
+#endif
+#if defined(XILINX_AXIEMAC_BASEADDR)
+# define CONFIG_XILINX_AXIEMAC 1
# define CONFIG_SYS_ENET
#endif
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
-# define CONFIG_SYS_GPIO_0 1
+# define CONFIG_XILINX_GPIO
# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
/* interrupt controller */
#ifdef XILINX_INTC_BASEADDR
-# define CONFIG_SYS_INTC_0 1
# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
#endif
/* timer */
-#ifdef XILINX_TIMER_BASEADDR
-# if (XILINX_TIMER_IRQ != -1)
-# define CONFIG_SYS_TIMER_0 1
+#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ)
# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
-# define FREQUENCE XILINX_CLOCK_FREQ
-# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
-# endif
-#elif XILINX_CLOCK_FREQ
-# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
+#endif
+
+/* watchdog */
+#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
+# define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR
+# define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ
+# define CONFIG_HW_WATCHDOG
+# define CONFIG_XILINX_TB_WATCHDOG
+#endif
+
+#if !defined(CONFIG_OF_CONTROL) || \
+ (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL))
+/* ddr sdram - main memory */
+# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
+# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
+#endif
+
+#define CONFIG_SYS_MALLOC_LEN 0xC0000
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_SYS_MALLOC_F_LEN 1024
#else
-# error BAD CLOCK FREQ
+# define CONFIG_SYS_MALLOC_SIMPLE
+# define CONFIG_SYS_MALLOC_F_LEN 0x150
#endif
-/* FSL */
-/* #define CONFIG_SYS_FSL_2 */
-/* #define FSL_INTR_2 1 */
+
+/* Stack location before relocation */
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_TEXT_BASE
/*
- * memory layout - Example
- * CONFIG_SYS_TEXT_BASE = 0x1200_0000;
- * CONFIG_SYS_SRAM_BASE = 0x1000_0000;
- * CONFIG_SYS_SRAM_SIZE = 0x0400_0000;
+ * CFI flash memory layout - Example
+ * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
+ * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB
*
- * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
- * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
- * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
+ * SECT_SIZE = 0x20000; 128kB is one sector
+ * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store
*
- * 0x1000_0000 CONFIG_SYS_SDRAM_BASE
- * FREE
- * 0x1200_0000 CONFIG_SYS_TEXT_BASE
- * U-BOOT code
- * 0x1202_0000
+ * 0x2200_0000 CONFIG_SYS_FLASH_BASE
+ * FREE 256kB
+ * 0x2204_0000 CONFIG_ENV_ADDR
+ * ENV_AREA 128kB
+ * 0x2206_0000
* FREE
+ * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
*
- * STACK
- * 0x13F7_F000 CONFIG_SYS_MALLOC_BASE
- * MALLOC_AREA 256kB Alloc
- * 0x11FB_F000 CONFIG_SYS_MONITOR_BASE
- * MONITOR_CODE 256kB Env
- * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET
- * GLOBAL_DATA 4kB bd, gd
- * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
*/
-/* ddr sdram - main memory */
-#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
-#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-/* global pointer */
-/* start of global data */
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/* monitor code */
-#define SIZE 0x40000
-#define CONFIG_SYS_MONITOR_LEN SIZE
-#define CONFIG_SYS_MONITOR_BASE \
- (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
- - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE)
-#define CONFIG_SYS_MONITOR_END \
- (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MALLOC_LEN SIZE
-#define CONFIG_SYS_MALLOC_BASE \
- (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-
-/* stack */
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE
-
-/*#define RAMENV */
-#define FLASH
-
#ifdef FLASH
# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
# define CONFIG_SYS_MAX_FLASH_SECT 512
/* hardware flash protection */
# define CONFIG_SYS_FLASH_PROTECTION
-
+/* use buffered writes (20x faster) */
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
# ifdef RAMENV
# define CONFIG_ENV_IS_NOWHERE 1
# define CONFIG_ENV_SIZE 0x1000
# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-# else /* !RAMENV */
+# else /* FLASH && !RAMENV */
# define CONFIG_ENV_IS_IN_FLASH 1
/* 128K(one sector) for env */
# define CONFIG_ENV_SECT_SIZE 0x20000
# define CONFIG_ENV_ADDR \
(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
# define CONFIG_ENV_SIZE 0x20000
-# endif /* !RAMBOOT */
+# endif /* FLASH && !RAMBOOT */
#else /* !FLASH */
+
+#ifdef SPIFLASH
+# define CONFIG_SYS_NO_FLASH 1
+# define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR
+# define CONFIG_XILINX_SPI 1
+# define CONFIG_SPI 1
+# define CONFIG_SPI_FLASH_STMICRO 1
+# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ
+# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS
+
+# ifdef RAMENV
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+
+# else /* SPIFLASH && !RAMENV */
+# define CONFIG_ENV_IS_IN_SPI_FLASH 1
+# define CONFIG_ENV_SPI_MODE SPI_MODE_3
+# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+/* 128K(two sectors) for env */
+# define CONFIG_ENV_SECT_SIZE 0x10000
+# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE)
+/* Warning: adjust the offset in respect of other flash content and size */
+# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
+# endif /* SPIFLASH && !RAMBOOT */
+#else /* !SPIFLASH */
+
/* ENV in RAM */
# define CONFIG_SYS_NO_FLASH 1
# define CONFIG_ENV_IS_NOWHERE 1
# define CONFIG_ENV_SIZE 0x1000
# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-/* hardware flash protection */
-# define CONFIG_SYS_FLASH_PROTECTION
+#endif /* !SPIFLASH */
#endif /* !FLASH */
/* system ace */
# undef CONFIG_DCACHE
#endif
+#ifndef XILINX_DCACHE_BYTE_SIZE
+#define XILINX_DCACHE_BYTE_SIZE 32768
+#endif
+
/*
* BOOTP options
*/
/*
* Command line configuration.
*/
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MFSL
-#define CONFIG_CMD_ECHO
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
# define CONFIG_CMD_CACHE
# undef CONFIG_CMD_CACHE
#endif
-#ifndef CONFIG_SYS_ENET
-# undef CONFIG_CMD_NET
-# undef CONFIG_NET_MULTI
-# undef CONFIG_CMD_NFS
-#else
+#ifdef CONFIG_SYS_ENET
# define CONFIG_CMD_PING
# define CONFIG_CMD_DHCP
-# define CONFIG_NET_MULTI
+# define CONFIG_CMD_TFTPPUT
#endif
#if defined(CONFIG_SYSTEMACE)
#endif
#if defined(FLASH)
-# define CONFIG_CMD_ECHO
-# define CONFIG_CMD_FLASH
-# define CONFIG_CMD_IMLS
# define CONFIG_CMD_JFFS2
+# define CONFIG_CMD_UBI
+# undef CONFIG_CMD_UBIFS
+
+# if !defined(RAMENV)
+# define CONFIG_CMD_SAVES
+# endif
+
+#else
+#if defined(SPIFLASH)
+# define CONFIG_CMD_SF
# if !defined(RAMENV)
-# define CONFIG_CMD_SAVEENV
# define CONFIG_CMD_SAVES
# endif
#else
-# undef CONFIG_CMD_IMLS
-# undef CONFIG_CMD_FLASH
# undef CONFIG_CMD_JFFS2
+# undef CONFIG_CMD_UBI
+# undef CONFIG_CMD_UBIFS
+#endif
#endif
#if defined(CONFIG_CMD_JFFS2)
-/* JFFS2 partitions */
+# define CONFIG_MTD_PARTITIONS
+#endif
+
+#if defined(CONFIG_CMD_UBIFS)
+# define CONFIG_CMD_UBI
+# define CONFIG_LZO
+#endif
+
+#if defined(CONFIG_CMD_UBI)
+# define CONFIG_MTD_PARTITIONS
+# define CONFIG_RBTREE
+#endif
+
+#if defined(CONFIG_MTD_PARTITIONS)
+/* MTD partitions */
#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_FLASH_CFI_MTD
"1m(cramfs),-(jffs2)"
#endif
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT "U-Boot-mONStR> "
/* size of console buffer */
#define CONFIG_SYS_CBSIZE 512
/* print buffer size */
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.5
#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
/* architecture dependent code */
#define CONFIG_SYS_USR_EXCEP /* user exception */
-#define CONFIG_SYS_HZ 1000
#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
"nor0=flash-0\0"\
"mtdparts=mtdparts=flash-0:"\
"256k(u-boot),256k(env),3m(kernel),"\
- "1m(romfs),1m(cramfs),-(jffs2)\0"
+ "1m(romfs),1m(cramfs),-(jffs2)\0"\
+ "nc=setenv stdout nc;"\
+ "setenv stdin nc\0" \
+ "serial=setenv stdout serial;"\
+ "setenv stdin serial\0"
#define CONFIG_CMDLINE_EDITING
+#define CONFIG_NETCONSOLE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-# define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* Enable flat device tree support */
+#define CONFIG_LMB 1
+#define CONFIG_FIT 1
+#define CONFIG_OF_LIBFDT 1
+
+#if defined(CONFIG_XILINX_LL_TEMAC) || defined(CONFIG_XILINX_AXIEMAC)
+# define CONFIG_MII 1
+# define CONFIG_CMD_MII 1
+# define CONFIG_PHY_GIGE 1
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
+# define CONFIG_PHYLIB 1
+# define CONFIG_PHY_ATHEROS 1
+# define CONFIG_PHY_BROADCOM 1
+# define CONFIG_PHY_DAVICOM 1
+# define CONFIG_PHY_LXT 1
+# define CONFIG_PHY_MARVELL 1
+# define CONFIG_PHY_MICREL 1
+# define CONFIG_PHY_NATSEMI 1
+# define CONFIG_PHY_REALTEK 1
+# define CONFIG_PHY_VITESSE 1
+#else
+# undef CONFIG_MII
+# undef CONFIG_CMD_MII
+# undef CONFIG_PHYLIB
#endif
+/* SPL part */
+#define CONFIG_CMD_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+
+#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
+
+#define CONFIG_SPL_RAM_DEVICE
+#ifdef CONFIG_SYS_FLASH_BASE
+# define CONFIG_SPL_NOR_SUPPORT
+# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
+#endif
+
+/* for booting directly linux */
+#define CONFIG_SPL_OS_BOOT
+
+#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + \
+ 0x60000)
+#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \
+ 0x40000)
+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \
+ 0x1000000)
+
+/* SP location before relocation, must use scratch RAM */
+/* BRAM start */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x0
+/* BRAM size - will be generated */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
+
+# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ CONFIG_SYS_MALLOC_F_LEN)
+
+/* Just for sure that there is a space for stack */
+#define CONFIG_SPL_STACK_SIZE 0x100
+
+#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
+ CONFIG_SYS_INIT_RAM_ADDR - \
+ CONFIG_SYS_MALLOC_F_LEN - \
+ CONFIG_SPL_STACK_SIZE)
+
#endif /* __CONFIG_H */