# define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-#if XILINX_UART16550_BASEADDR
-# define CONFIG_SYS_NS16550_SERIAL
-# if defined(__MICROBLAZEEL__)
-# define CONFIG_SYS_NS16550_REG_SIZE -4
-# else
-# define CONFIG_SYS_NS16550_REG_SIZE 4
-# endif
-# define CONFIG_CONS_INDEX 1
-# define CONFIG_SYS_NS16550_COM1 \
- ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
-# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
-#endif
-
/* setting reset address */
/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
-/* ethernet */
-#undef CONFIG_SYS_ENET
-#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL)
-# define CONFIG_XILINX_EMACLITE 1
-# define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_AXIEMAC_BASEADDR)
-# define CONFIG_XILINX_AXIEMAC 1
-# define CONFIG_SYS_ENET
-#endif
-
-#undef ET_DEBUG
-
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
# define CONFIG_XILINX_GPIO
# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
-
-/* interrupt controller */
-#ifdef XILINX_INTC_BASEADDR
-# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
-# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
-#endif
-
-/* timer */
-#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ)
-# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
-# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
-#endif
+#define CONFIG_BOARD_LATE_INIT
/* watchdog */
#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
# endif
#endif
-#if !defined(CONFIG_OF_CONTROL) || \
- (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL))
-/* ddr sdram - main memory */
-# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
-# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
-#endif
-
#define CONFIG_SYS_MALLOC_LEN 0xC0000
/* Stack location before relocation */
#endif /* !SPIFLASH */
#endif /* !FLASH */
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
-# define CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-# define SYSTEMACE_CONFIG_FPGA
-# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
-# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
-# define CONFIG_DOS_PARTITION
-#endif
-
#if defined(XILINX_USE_ICACHE)
# define CONFIG_ICACHE
#else
/*
* Command line configuration.
*/
-#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MFSL
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
-# define CONFIG_CMD_CACHE
#else
-# undef CONFIG_CMD_CACHE
-#endif
-
-#ifdef CONFIG_SYS_ENET
-# define CONFIG_CMD_PING
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_TFTPPUT
-#endif
-
-#if defined(CONFIG_SYSTEMACE)
-# define CONFIG_CMD_EXT2
-# define CONFIG_CMD_FAT
#endif
#if defined(FLASH)
#else
#if defined(SPIFLASH)
-# define CONFIG_CMD_SF
# if !defined(RAMENV)
# define CONFIG_CMD_SAVES
#define CONFIG_SYS_MAXARGS 15
#define CONFIG_SYS_LONGHELP
/* default load address */
-#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START
+#define CONFIG_SYS_LOAD_ADDR 0
-#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
#define CONFIG_BOOTARGS "root=romfs"
#define CONFIG_HOSTNAME XILINX_BOARD_NAME
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_NETCONSOLE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
/* Enable flat device tree support */
#define CONFIG_LMB 1
-#define CONFIG_FIT 1
-#define CONFIG_OF_LIBFDT 1
#if defined(CONFIG_XILINX_AXIEMAC)
# define CONFIG_MII 1
-# define CONFIG_CMD_MII 1
# define CONFIG_PHY_GIGE 1
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
-# define CONFIG_PHYLIB 1
# define CONFIG_PHY_ATHEROS 1
# define CONFIG_PHY_BROADCOM 1
# define CONFIG_PHY_DAVICOM 1
# define CONFIG_PHY_LXT 1
# define CONFIG_PHY_MARVELL 1
# define CONFIG_PHY_MICREL 1
+# define CONFIG_PHY_MICREL_KSZ9021
# define CONFIG_PHY_NATSEMI 1
# define CONFIG_PHY_REALTEK 1
# define CONFIG_PHY_VITESSE 1
#else
# undef CONFIG_MII
-# undef CONFIG_CMD_MII
-# undef CONFIG_PHYLIB
#endif
/* SPL part */