exynos: remove CONFIG_LCD_MENU_BOARD

[platform/kernel/u-boot.git] / include / configs / microblaze-generic.h

diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index cc7f819..2cc4b8a 100644 (file)
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -95,12 +95,10 @@
 /* use buffered writes (20x faster) */
 # define       CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 # ifdef        RAMENV
-#  define CONFIG_ENV_IS_NOWHERE        1
 #  define CONFIG_ENV_SIZE      0x1000
 #  define CONFIG_ENV_ADDR      (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 
 # else /* FLASH && !RAMENV */
-#  define CONFIG_ENV_IS_IN_FLASH       1
 /* 128K(one sector) for env */
 #  define CONFIG_ENV_SECT_SIZE 0x20000
 #  define CONFIG_ENV_ADDR \
@@ -117,12 +115,10 @@
 # define CONFIG_SF_DEFAULT_CS          XILINX_SPI_FLASH_CS
 
 # ifdef        RAMENV
-#  define CONFIG_ENV_IS_NOWHERE        1
 #  define CONFIG_ENV_SIZE      0x1000
 #  define CONFIG_ENV_ADDR      (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 
 # else /* SPIFLASH && !RAMENV */
-#  define CONFIG_ENV_IS_IN_SPI_FLASH   1
 #  define CONFIG_ENV_SPI_MODE          SPI_MODE_3
 #  define CONFIG_ENV_SPI_MAX_HZ                CONFIG_SF_DEFAULT_SPEED
 #  define CONFIG_ENV_SPI_CS            CONFIG_SF_DEFAULT_CS
@@ -135,7 +131,6 @@
 #else /* !SPIFLASH */
 
 /* ENV in RAM */
-# define CONFIG_ENV_IS_NOWHERE 1
 # define CONFIG_ENV_SIZE       0x1000
 # define CONFIG_ENV_ADDR       (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 #endif /* !SPIFLASH */
@@ -165,45 +160,16 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_MFSL
-
-#if defined(FLASH)
-# undef CONFIG_CMD_UBIFS
-
-# if !defined(RAMENV)
-#  define CONFIG_CMD_SAVES
-# endif
-
-#else
-#if defined(SPIFLASH)
-
-# if !defined(RAMENV)
-#  define CONFIG_CMD_SAVES
-# endif
-#else
-# undef CONFIG_CMD_UBIFS
-#endif
-#endif
-
 #if defined(CONFIG_CMD_JFFS2)
 # define CONFIG_MTD_PARTITIONS
 #endif
 
-#if defined(CONFIG_CMD_UBIFS)
-# define CONFIG_LZO
-#endif
-
 #if defined(CONFIG_CMD_UBI)
 # define CONFIG_MTD_PARTITIONS
-# define CONFIG_RBTREE
 #endif
 
 #if defined(CONFIG_MTD_PARTITIONS)
 /* MTD partitions */
-#define CONFIG_CMD_MTDPARTS    /* mtdparts command line support */
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT         "nor0=flash-0"
@@ -216,16 +182,12 @@
 
 /* size of console buffer */
 #define        CONFIG_SYS_CBSIZE       512
- /* print buffer size */
-#define        CONFIG_SYS_PBSIZE \
-               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 /* max number of command args */
 #define        CONFIG_SYS_MAXARGS      15
 #define        CONFIG_SYS_LONGHELP
 /* default load address */
 #define        CONFIG_SYS_LOAD_ADDR    0
 
-#define        CONFIG_BOOTARGS         "root=romfs"
 #define        CONFIG_HOSTNAME         XILINX_BOARD_NAME
 #define        CONFIG_BOOTCOMMAND      "base 0;tftp 11000000 image.img;bootm"
 
@@ -253,15 +215,12 @@
 
 #if defined(CONFIG_XILINX_AXIEMAC)
 # define CONFIG_MII            1
-# define CONFIG_PHY_GIGE       1
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN       1
 # define CONFIG_PHY_ATHEROS    1
 # define CONFIG_PHY_BROADCOM   1
 # define CONFIG_PHY_DAVICOM    1
 # define CONFIG_PHY_LXT                1
 # define CONFIG_PHY_MARVELL    1
-# define CONFIG_PHY_MICREL     1
-# define CONFIG_PHY_MICREL_KSZ9021
 # define CONFIG_PHY_NATSEMI    1
 # define CONFIG_PHY_REALTEK    1
 # define CONFIG_PHY_VITESSE    1
@@ -270,11 +229,8 @@
 #endif
 
 /* SPL part */
-#define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
 
-#define CONFIG_SPL_LDSCRIPT    "arch/microblaze/cpu/u-boot-spl.lds"
-
 #ifdef CONFIG_SYS_FLASH_BASE
 # define CONFIG_SYS_UBOOT_BASE         CONFIG_SYS_FLASH_BASE
 #endif