#ifndef __MESON64_ANDROID_CONFIG_H
#define __MESON64_ANDROID_CONFIG_H
+#include <linux/sizes.h>
+
#ifndef BOOT_PARTITION
#define BOOT_PARTITION "boot"
#endif
#define LOGO_PARTITION "logo"
#endif
+#ifndef CONTROL_PARTITION
+#define CONTROL_PARTITION "misc"
+#endif
+
+#ifndef EXTRA_ANDROID_ENV_SETTINGS
+#define EXTRA_ANDROID_ENV_SETTINGS ""
+#endif
+
+#if defined(CONFIG_CMD_AVB)
+#define AVB_VERIFY_CHECK \
+ "if test \"${force_avb}\" -eq 1; then " \
+ "if run avb_verify; then " \
+ "echo AVB verification OK.;" \
+ "setenv bootargs \"$bootargs $avb_bootargs\";" \
+ "else " \
+ "echo AVB verification failed.;" \
+ "exit; fi;" \
+ "else " \
+ "setenv bootargs \"$bootargs androidboot.verifiedbootstate=orange\";" \
+ "echo Running without AVB...; "\
+ "fi;"
+
+#define AVB_VERIFY_CMD "avb_verify=avb init ${mmcdev}; avb verify $slot_suffix;\0"
+#else
+#define AVB_VERIFY_CHECK ""
+#define AVB_VERIFY_CMD ""
+#endif
+
+#if defined(CONFIG_CMD_AB_SELECT)
+#define ANDROIDBOOT_GET_CURRENT_SLOT_CMD "get_current_slot=" \
+ "if part number mmc ${mmcdev} " CONTROL_PARTITION " control_part_number; " \
+ "then " \
+ "echo " CONTROL_PARTITION \
+ " partition number:${control_part_number};" \
+ "ab_select current_slot mmc ${mmcdev}:${control_part_number};" \
+ "else " \
+ "echo " CONTROL_PARTITION " partition not found;" \
+ "fi;\0"
+
+#define AB_SELECT_SLOT \
+ "run get_current_slot; " \
+ "if test -e \"${current_slot}\"; " \
+ "then " \
+ "setenv slot_suffix _${current_slot}; " \
+ "else " \
+ "echo current_slot not found;" \
+ "exit;" \
+ "fi;"
+
+#define AB_SELECT_ARGS \
+ "setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \
+ "echo A/B cmdline addition: ${bootargs_ab};" \
+ "setenv bootargs ${bootargs} ${bootargs_ab};"
+
+#define AB_BOOTARGS " androidboot.force_normal_boot=1"
+#define RECOVERY_PARTITION "boot"
+#else
+#define AB_SELECT_SLOT ""
+#define AB_SELECT_ARGS " "
+#define ANDROIDBOOT_GET_CURRENT_SLOT_CMD ""
+#define AB_BOOTARGS " "
+#define RECOVERY_PARTITION "recovery"
+#endif
+
+#if defined(CONFIG_CMD_ABOOTIMG)
+/*
+ * Prepares complete device tree blob for current board (for Android boot).
+ *
+ * Boot image or recovery image should be loaded into $loadaddr prior to running
+ * these commands. The logic of these commnads is next:
+ *
+ * 1. Read correct DTB for current SoC/board from boot image in $loadaddr
+ * to $fdtaddr
+ * 2. Merge all needed DTBO for current board from 'dtbo' partition into read
+ * DTB
+ * 3. User should provide $fdtaddr as 3rd argument to 'bootm'
+ */
+#define PREPARE_FDT \
+ "echo Preparing FDT...; " \
+ "if test $board_name = sei510; then " \
+ "echo \" Reading DTB for sei510...\"; " \
+ "setenv dtb_index 0;" \
+ "elif test $board_name = sei610; then " \
+ "echo \" Reading DTB for sei610...\"; " \
+ "setenv dtb_index 1;" \
+ "elif test $board_name = vim3l; then " \
+ "echo \" Reading DTB for vim3l...\"; " \
+ "setenv dtb_index 2;" \
+ "elif test $board_name = vim3; then " \
+ "echo \" Reading DTB for vim3...\"; " \
+ "setenv dtb_index 3;" \
+ "else " \
+ "echo Error: Android boot is not supported for $board_name; " \
+ "exit; " \
+ "fi; " \
+ "abootimg get dtb --index=$dtb_index dtb_start dtb_size; " \
+ "cp.b $dtb_start $fdt_addr_r $dtb_size; " \
+ "fdt addr $fdt_addr_r 0x80000; " \
+ "if test $board_name = sei510; then " \
+ "echo \" Reading DTBO for sei510...\"; " \
+ "setenv dtbo_index 0;" \
+ "elif test $board_name = sei610; then " \
+ "echo \" Reading DTBO for sei610...\"; " \
+ "setenv dtbo_index 1;" \
+ "elif test $board_name = vim3l; then " \
+ "echo \" Reading DTBO for vim3l...\"; " \
+ "setenv dtbo_index 2;" \
+ "elif test $board_name = vim3; then " \
+ "echo \" Reading DTBO for vim3...\"; " \
+ "setenv dtbo_index 3;" \
+ "else " \
+ "echo Error: Android boot is not supported for $board_name; " \
+ "exit; " \
+ "fi; " \
+ "part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \
+ "part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \
+ "mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \
+ "echo \" Applying DTBOs...\"; " \
+ "adtimg addr $dtboaddr; " \
+ "adtimg get dt --index=$dtbo_index dtbo0_addr; " \
+ "fdt apply $dtbo0_addr;" \
+ "setenv bootargs \"$bootargs androidboot.dtbo_idx=$dtbo_index \";"\
+
+#define BOOT_CMD "bootm ${loadaddr} ${loadaddr} ${fdt_addr_r};"
+
+#else
+#define PREPARE_FDT " "
+#define BOOT_CMD "bootm ${loadaddr};"
+#endif
+
#define BOOTENV_DEV_FASTBOOT(devtypeu, devtypel, instance) \
"bootcmd_fastboot=" \
- "sm reboot_reason reason;" \
"setenv run_fastboot 0;" \
"if test \"${boot_source}\" = \"usb\"; then " \
"echo Fastboot forced by usb rom boot;" \
"setenv run_fastboot 1;" \
"fi;" \
- "if gpt verify mmc ${mmcdev} ${partitions}; then; " \
- "else " \
- "echo Broken MMC partition scheme;" \
- "setenv run_fastboot 1;" \
- "fi;" \
- "if test \"${reason}\" = \"bootloader\" -o " \
- "\"${reason}\" = \"fastboot\"; then " \
- "echo Fastboot asked by reboot reason;" \
- "setenv run_fastboot 1;" \
- "fi;" \
- "if test \"${skip_fastboot}\" -eq 1; then " \
- "echo Fastboot skipped by environment;" \
- "setenv run_fastboot 0;" \
+ "if test \"${run_fastboot}\" -eq 0; then " \
+ "if gpt verify mmc ${mmcdev} ${partitions}; then; " \
+ "else " \
+ "echo Broken MMC partition scheme;" \
+ "setenv run_fastboot 1;" \
+ "fi; " \
"fi;" \
- "if test \"${force_fastboot}\" -eq 1; then " \
- "echo Fastboot forced by environment;" \
- "setenv run_fastboot 1;" \
+ "if test \"${run_fastboot}\" -eq 0; then " \
+ "if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \
+ CONTROL_PARTITION "; then " \
+ "if bcb test command = bootonce-bootloader; then " \
+ "echo BCB: Bootloader boot...; " \
+ "bcb clear command; bcb store; " \
+ "setenv run_fastboot 1;" \
+ "elif bcb test command = boot-fastboot; then " \
+ "echo BCB: fastboot userspace boot...; " \
+ "setenv force_recovery 1;" \
+ "fi; " \
+ "else " \
+ "echo Warning: BCB is corrupted or does not exist; " \
+ "fi;" \
"fi;" \
"if test \"${run_fastboot}\" -eq 1; then " \
"echo Running Fastboot...;" \
#define BOOTENV_DEV_NAME_FASTBOOT(devtypeu, devtypel, instance) \
"fastboot "
-/* TOFIX: Run actual recovery instead of fastboot */
#define BOOTENV_DEV_RECOVERY(devtypeu, devtypel, instance) \
"bootcmd_recovery=" \
"pinmux dev pinctrl@14;" \
"pinmux dev pinctrl@40;" \
- "sm reboot_reason reason;" \
"setenv run_recovery 0;" \
"if run check_button; then " \
"echo Recovery button is pressed;" \
"setenv run_recovery 1;" \
- "elif test \"${reason}\" = \"recovery\" -o " \
- "\"${reason}\" = \"update\"; then " \
- "echo Recovery asked by reboot reason;" \
- "setenv run_recovery 1;" \
+ "fi; " \
+ "if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \
+ CONTROL_PARTITION "; then " \
+ "if bcb test command = boot-recovery; then " \
+ "echo BCB: Recovery boot...; " \
+ "setenv run_recovery 1;" \
+ "fi;" \
+ "else " \
+ "echo Warning: BCB is corrupted or does not exist; " \
"fi;" \
"if test \"${skip_recovery}\" -eq 1; then " \
"echo Recovery skipped by environment;" \
"fi;" \
"if test \"${run_recovery}\" -eq 1; then " \
"echo Running Recovery...;" \
- "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
+ "mmc dev ${mmcdev};" \
+ "setenv bootargs \"${bootargs} androidboot.serialno=${serial#}\";" \
+ AB_SELECT_SLOT \
+ AB_SELECT_ARGS \
+ AVB_VERIFY_CHECK \
+ "part start mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_start;" \
+ "part size mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_size;" \
+ "if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
+ PREPARE_FDT \
+ "echo Running Android Recovery...;" \
+ BOOT_CMD \
+ "fi;" \
+ "echo Failed to boot Android...;" \
+ "reset;" \
"fi\0"
#define BOOTENV_DEV_NAME_RECOVERY(devtypeu, devtypel, instance) \
"bootcmd_system=" \
"echo Loading Android " BOOT_PARTITION " partition...;" \
"mmc dev ${mmcdev};" \
- "setenv bootargs ${bootargs} console=${console} androidboot.serialno=${serial#};" \
- "part start mmc ${mmcdev} " BOOT_PARTITION " boot_start;" \
- "part size mmc ${mmcdev} " BOOT_PARTITION " boot_size;" \
+ "setenv bootargs ${bootargs} androidboot.serialno=${serial#};" \
+ AB_SELECT_SLOT \
+ AB_SELECT_ARGS \
+ AVB_VERIFY_CHECK \
+ "part start mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_start;" \
+ "part size mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_size;" \
"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
+ PREPARE_FDT \
+ "setenv bootargs \"${bootargs} " AB_BOOTARGS "\" ; " \
"echo Running Android...;" \
- "bootm ${loadaddr};" \
+ BOOT_CMD \
"fi;" \
- "echo Failed to boot Android...;" \
- "reset\0"
+ "echo Failed to boot Android...;\0"
#define BOOTENV_DEV_NAME_SYSTEM(devtypeu, devtypel, instance) \
"system "
+#define BOOTENV_DEV_PANIC(devtypeu, devtypel, instance) \
+ "bootcmd_panic=" \
+ "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
+ "reset\0"
+
+#define BOOTENV_DEV_NAME_PANIC(devtypeu, devtypel, instance) \
+ "panic "
+
#define BOOT_TARGET_DEVICES(func) \
func(FASTBOOT, fastboot, na) \
func(RECOVERY, recovery, na) \
func(SYSTEM, system, na) \
+ func(PANIC, panic, na) \
#define PREBOOT_LOAD_LOGO \
"if test \"${boot_source}\" != \"usb\" && " \
"fi;" \
"fi;"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
+ EXTRA_ANDROID_ENV_SETTINGS \
"partitions=" PARTS_DEFAULT "\0" \
"mmcdev=2\0" \
+ "fastboot_raw_partition_bootloader=0x1 0xfff mmcpart 1\0" \
+ "fastboot_raw_partition_bootenv=0x0 0xfff mmcpart 2\0" \
+ ANDROIDBOOT_GET_CURRENT_SLOT_CMD \
+ AVB_VERIFY_CMD \
+ "force_avb=0\0" \
"gpio_recovery=88\0" \
"check_button=gpio input ${gpio_recovery};test $? -eq 0;\0" \
"load_logo=" PREBOOT_LOAD_LOGO "\0" \
- "console=/dev/ttyAML0\0" \
- "bootargs=no_console_suspend\0" \
"stdin=" STDIN_CFG "\0" \
"stdout=" STDOUT_CFG "\0" \
"stderr=" STDOUT_CFG "\0" \
- "loadaddr=0x01000000\0" \
+ "dtboaddr=0x08200000\0" \
+ "loadaddr=0x01080000\0" \
"fdt_addr_r=0x01000000\0" \
"scriptaddr=0x08000000\0" \
"kernel_addr_r=0x01080000\0" \