Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / mecp5123.h

diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 1ecae00..43c0528 100644 (file)
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -48,6 +48,8 @@
 #define CONFIG_E300            1       /* E300 Family */
 #define CONFIG_MPC512X         1       /* MPC512X family */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
+
 #define CONFIG_SYS_MPC512X_CLKIN       33333333        /* in Hz */
 
 #define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f() */
@@ -66,6 +68,9 @@
 
 #define CONFIG_SYS_DDR_BASE            0x00000000      /* DDR is sys memory*/
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_MAX_RAM_SIZE                0x20000000
+
+#define CONFIG_SYS_IOCTRL_MUX_DDR      0x00000036
 
 /* DDR Controller Configuration
  *
@@ -111,22 +116,19 @@
  *     [09:05] DRAM tRP:
  *     [04:00] DRAM tRPA
  */
-#define CONFIG_SYS_MDDRC_SYS_CFG        0xFA804A00
-#define CONFIG_SYS_MDDRC_SYS_CFG_RUN    0xEA804A00
+#define CONFIG_SYS_MDDRC_SYS_CFG        0xEA804A00
+#define CONFIG_SYS_MDDRC_TIME_CFG0      0x06183D2E
 #define CONFIG_SYS_MDDRC_TIME_CFG1      0x68EC1168
 #define CONFIG_SYS_MDDRC_TIME_CFG2      0x34310864
-#define CONFIG_SYS_MDDRC_SYS_CFG_EN    0xF0000000
-#define CONFIG_SYS_MDDRC_TIME_CFG0     0x00003D2E
-#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x06183D2E
-
-#define CONFIG_SYS_MICRON_NOP          0x01380000
-#define CONFIG_SYS_MICRON_PCHG_ALL     0x01100400
-#define CONFIG_SYS_MICRON_EM2          0x01020000
-#define CONFIG_SYS_MICRON_EM3          0x01030000
-#define CONFIG_SYS_MICRON_EN_DLL       0x01010000
-#define CONFIG_SYS_MICRON_RFSH         0x01080000
+
+#define CONFIG_SYS_DDRCMD_NOP          0x01380000
+#define CONFIG_SYS_DDRCMD_PCHG_ALL     0x01100400
+#define CONFIG_SYS_DDRCMD_EM2          0x01020000
+#define CONFIG_SYS_DDRCMD_EM3          0x01030000
+#define CONFIG_SYS_DDRCMD_EN_DLL       0x01010000
+#define CONFIG_SYS_DDRCMD_RFSH         0x01080000
 #define CONFIG_SYS_MICRON_INIT_DEV_OP  0x01000432
-#define CONFIG_SYS_MICRON_OCD_DEFAULT  0x01010780
+#define CONFIG_SYS_DDRCMD_OCD_DEFAULT  0x01010780
 
 /* DDR Priority Manager Configuration */
 #define CONFIG_SYS_MDDRCGRP_PM_CFG1    0x00077777
@@ -180,8 +182,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 
-#define        CONFIG_SYS_64BIT_VSPRINTF       /* needed for nand_util.c */
-
 /*
  * Configuration parameters for MPC5121 NAND driver
  */
@@ -212,7 +212,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE                TEXT_BASE       /* Start of monitor */
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE    /* Start of monitor */
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024)    /* Monitor length */
 #define CONFIG_SYS_MALLOC_LEN          (6 * 1024 * 1024) /* Malloc size */
 
@@ -220,7 +220,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX     1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 
 /*
  * Serial console configuration
@@ -346,10 +345,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Linux initial memory map */
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Linux initial memory map */
 
 /* Cache Configuration */
 #define CONFIG_SYS_DCACHE_SIZE         32768