Convert CONFIG_CMD_JFFS2 to Kconfig

[platform/kernel/u-boot.git] / include / configs / mecp5123.h

diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 4211e72..17a97df 100644 (file)
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -15,7 +15,6 @@
 #define __CONFIG_H
 
 #define CONFIG_MECP5123 1
-#define CONFIG_DISPLAY_BOARDINFO
 
 /*
  * Memory map for the MECP5123 board:
@@ -36,7 +35,6 @@
 
 #define CONFIG_SYS_MPC512X_CLKIN       33333333        /* in Hz */
 
-#define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f() */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_IMMR                        0x80000000
@@ -217,7 +215,6 @@
 #if CONFIG_PSC_CONSOLE != 3
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
-#define CONFIG_BAUDRATE                9600    /* ... at 9600 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE  \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
@@ -244,27 +241,12 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 
-/* I2C */
-#define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE           0x7F    /* slave address */
-
 /*
  * IIM - IC Identification Module
  */
 #undef CONFIG_FSL_IIM
 
 /*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2       /* 16-bit EEPROM address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Atmel: AT24C32A-10TQ-2.7 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10       /* 10ms of delay */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5    /* 32-Byte Page Write Mode */
-#define CONFIG_SYS_EEPROM_WREN                 /* Use EEPROM write protect */
-
-/*
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC     1
@@ -283,7 +265,7 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_IS_IN_EEPROM                /* Store env in I2C EEPROM      */
+#define CONFIG_ENV_IS_NOWHERE          /* Store env in I2C EEPROM      */
 #define CONFIG_ENV_SIZE                0x1000
 #define CONFIG_ENV_OFFSET       0x0000 /* environment starts here      */
 
@@ -291,12 +273,6 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change        */
 
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DATE
-#undef CONFIG_CMD_FUSE
-#undef CONFIG_CMD_IDE
-#define CONFIG_CMD_JFFS2
-#define CONFIG_DOS_PARTITION
 
 /*
  * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.