/*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* Serial console configuration
/* USB */
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
/* automatic software updates (see board/mcc200/auto_update.c) */
#define CONFIG_AUTO_UPDATE 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_USB_CMD | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C)
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_USB
+
+#undef CONFIG_CMD_NET
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Autobooting
*/
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
# define CFG__LINUX_CONSOLE "ttyS0"
#else
# define CFG__BOARDNAME "mcc200"
-# define CFG__LINUX_CONSOLE "ttyEU7"
+# define CFG__LINUX_CONSOLE "ttyEU5"
#endif
+/* Network */
+#define CONFIG_ETHADDR 00:17:17:ff:00:00
+#define CONFIG_IPADDR 10.76.9.29
+#define CONFIG_SERVERIP 10.76.9.1
+
+#include <version.h> /* For U-Boot version */
+
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ubootver=" U_BOOT_VERSION "\0" \
"netdev=eth0\0" \
"hostname=" CFG__BOARDNAME "\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "ramargs=setenv bootargs root=/dev/mtdblock2 " \
+ "rootfstype=cramfs\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addcons=setenv bootargs ${bootargs} " \
- "console=${console},${baudrate}\0" \
+ "console=${console},${baudrate} " \
+ "ubootver=${ubootver} board=${board}\0" \
"flash_nfs=run nfsargs addip addcons;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addcons;" \
"bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \
"load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \
"text_base=" MK_STR(TEXT_BASE) "\0" \
+ "kernel_addr=0xFC0C0000\0" \
"update=protect off ${text_base} +${filesize};" \
"era ${text_base} +${filesize};" \
"cp.b 200000 ${text_base} ${filesize}\0" \
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* I2C configuration
#define CFG_FLASH_SIZE 0x04000000
#define CFG_FLASH_CFI /* The flash is CFI compatible */
-#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
-#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
-#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
+#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
-#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
/*
* Ethernet configuration
*/
-#define CONFIG_MPC5xxx_FEC 1
+/*#define CONFIG_MPC5xxx_FEC 1*/
/*
* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
*/
*/
#if !defined(CONFIG_PRS200)
#define CONFIG_LCD 1
+#define CONFIG_PROGRESSBAR 1
#endif
#if defined(CONFIG_LCD)
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
#define CFG_CS1_SIZE 0x00001000
#define CFG_CS1_CFG 0x1d300
+/* Leica - build revision resistors */
+/*
+#define CFG_CS3_START 0x80020000
+#define CFG_CS3_SIZE 0x00000004
+#define CFG_CS3_CFG 0x1d300
+*/
+
/*
* Select one of quarts as a default
* console. If undefined - PSC console
#define CONFIG_USB_CLOCK 0x0001BBBB
#define CONFIG_USB_CONFIG 0x00005000
+#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
+#define CONFIG_AUTOBOOT_STOP_STR "432"
+#define CONFIG_SILENT_CONSOLE 1
+
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff