Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / mcc200.h

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index e64cc37..72d9750 100644 (file)
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -33,6 +33,16 @@
 #define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU               */
 #define CONFIG_MCC200          1       /* ... on MCC200 board                  */
 
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFC000000  boot low (standard configuration)
+ * 0xFFF00000  boot high
+ * 0x00100000  boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFC000000
+#endif
+
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33MHz                */
 
 #define CONFIG_MISC_INIT_R
@@ -169,7 +179,7 @@
        "rootpath=/opt/eldk/ppc_6xx\0"                                  \
        "bootfile=/tftpboot/" CONFIG_SYS__BOARDNAME "/uImage\0"         \
        "load=tftp 200000 /tftpboot/" CONFIG_SYS__BOARDNAME "/u-boot.bin\0"     \
-       "text_base=" MK_STR(TEXT_BASE) "\0"                             \
+       "text_base=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"                          \
        "kernel_addr=0xFC0C0000\0"                                      \
        "update=protect off ${text_base} +${filesize};"                 \
                "era ${text_base} +${filesize};"                        \
@@ -239,7 +249,7 @@
 
 #define CONFIG_ENV_OVERWRITE   1       /* allow modification of vendor params */
 
-#if TEXT_BASE == CONFIG_SYS_FLASH_BASE
+#if CONFIG_SYS_TEXT_BASE == CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_LOWBOOT     1
 #endif
 
@@ -259,7 +269,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT          1
 #endif
@@ -271,11 +281,12 @@
 /*
  * Ethernet configuration
  */
-/*#define CONFIG_MPC5xxx_FEC   1*/
+/* #define CONFIG_MPC5xxx_FEC  1 */
+/* #define CONFIG_MPC5xxx_FEC_MII100 */
 /*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
  */
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
 #define CONFIG_PHY_ADDR                1
 
 /*
@@ -397,7 +408,7 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
 #elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
-#elif
+#else
 #error "Wrong QUART expander number."
 #endif