Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig

[platform/kernel/u-boot.git] / include / configs / maxbcm.h

diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index 72217bd..73b9d55 100644 (file)
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -10,39 +10,32 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_ARMADA_XP               /* SOC Family Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 
-#define        CONFIG_SYS_TEXT_BASE    0x04000000
+/*
+ * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
+ * for DDR ECC byte filling in the SPL before loading the main
+ * U-Boot into it.
+ */
+#define        CONFIG_SYS_TEXT_BASE    0x00800000
 #define CONFIG_SYS_TCLK                250000000       /* 250MHz */
 
 /*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_TFTPPUT
-#define CONFIG_CMD_TIME
 
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
-#define CONFIG_I2C_MVTWSI_BASE         MVEBU_TWSI_BASE
+#define CONFIG_I2C_MVTWSI_BASE0                MVEBU_TWSI_BASE
 #define CONFIG_SYS_I2C_SLAVE           0x0
 #define CONFIG_SYS_I2C_SPEED           100000
 
 /* SPI NOR flash default params, used by sf commands */
 #define CONFIG_SF_DEFAULT_SPEED                1000000
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
-#define CONFIG_SPI_FLASH_STMICRO
 
 /* Environment in SPI NOR flash */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -51,10 +44,7 @@
 #define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
 
 #define CONFIG_PHY_MARVELL             /* there is a marvell phy */
-#define CONFIG_PHY_BASE_ADDR   0x0
-#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
-#define CONFIG_RESET_PHY_R
 
 #define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup */
 #define CONFIG_SYS_ALT_MEMTEST
@@ -65,4 +55,46 @@
  */
 #include "mv-common.h"
 
+/*
+ * Memory layout while starting into the bin_hdr via the
+ * BootROM:
+ *
+ * 0x4000.4000 - 0x4003.4000   headers space (192KiB)
+ * 0x4000.4030                 bin_hdr start address
+ * 0x4003.4000 - 0x4004.7c00   BootROM memory allocations (15KiB)
+ * 0x4007.fffc                 BootROM stack top
+ *
+ * The address space between 0x4007.fffc and 0x400f.fff is not locked in
+ * L2 cache thus cannot be used.
+ */
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE           0x40004030
+#define CONFIG_SPL_MAX_SIZE            ((128 << 10) - 0x4030)
+
+#define CONFIG_SPL_BSS_START_ADDR      (0x40000000 + (128 << 10))
+#define CONFIG_SPL_BSS_MAX_SIZE                (16 << 10)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
+
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+
+/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
+#define CONFIG_DDR_FIXED_SIZE          (1 << 20)       /* 1GiB */
+#define CONFIG_BOARD_ECC_SUPPORT       /* this board supports ECC */
+
 #endif /* _CONFIG_DB_MV7846MP_GP_H */