global: Migrate CONFIG_MXC_UART_BASE to CFG

[platform/kernel/u-boot.git] / include / configs / maxbcm.h

diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index 72217bd..413597e 100644 (file)
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -1,63 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_DB_MV7846MP_GP_H
 #define _CONFIG_DB_MV7846MP_GP_H
 
+#include <linux/sizes.h>
+
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_ARMADA_XP               /* SOC Family Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-#define        CONFIG_SYS_TEXT_BASE    0x04000000
-#define CONFIG_SYS_TCLK                250000000       /* 250MHz */
 
 /*
- * Commands configuration
+ * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
+ * for DDR ECC byte filling in the SPL before loading the main
+ * U-Boot into it.
  */
-#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_TFTPPUT
-#define CONFIG_CMD_TIME
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MVTWSI
-#define CONFIG_I2C_MVTWSI_BASE         MVEBU_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE           0x0
-#define CONFIG_SYS_I2C_SPEED           100000
+#define CFG_I2C_MVTWSI_BASE0           MVEBU_TWSI_BASE
 
 /* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED                1000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
-#define CONFIG_SPI_FLASH_STMICRO
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET              (1 << 20) /* 1MiB in */
-#define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
 
-#define CONFIG_PHY_MARVELL             /* there is a marvell phy */
-#define CONFIG_PHY_BASE_ADDR   0x0
-#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
-#define CONFIG_RESET_PHY_R
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup */
-#define CONFIG_SYS_ALT_MEMTEST
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -65,4 +33,20 @@
  */
 #include "mv-common.h"
 
+/*
+ * Memory layout while starting into the bin_hdr via the
+ * BootROM:
+ *
+ * 0x4000.4000 - 0x4003.4000   headers space (192KiB)
+ * 0x4000.4030                 bin_hdr start address
+ * 0x4003.4000 - 0x4004.7c00   BootROM memory allocations (15KiB)
+ * 0x4007.fffc                 BootROM stack top
+ *
+ * The address space between 0x4007.fffc and 0x400f.fff is not locked in
+ * L2 cache thus cannot be used.
+ */
+
+/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
+#define CFG_SYS_SDRAM_SIZE             SZ_1G
+
 #endif /* _CONFIG_DB_MV7846MP_GP_H */