common: Move CONFIG_BOOTARGS to Kconfig

[platform/kernel/u-boot.git] / include / configs / m28evk.h

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 2d9ad5f..4fcf480 100644 (file)
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -9,47 +9,10 @@
 
 /* System configurations */
 #define CONFIG_MX28                            /* i.MX28 SoC */
-#define MACH_TYPE_M28EVK       3613
 #define CONFIG_MACH_TYPE       MACH_TYPE_M28EVK
 
-#define CONFIG_FIT
-
 #define CONFIG_TIMESTAMP               /* Print image info with timestamp */
 
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define        CONFIG_VIDEO
-
-#define CONFIG_REGEX                   /* Enable regular expression support */
-
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
 #define PHYS_SDRAM_1                   0x40000000      /* Base address */
@@ -58,7 +21,6 @@
 
 /* Environment */
 #define CONFIG_ENV_SIZE                        (16 * 1024)
-#define CONFIG_ENV_IS_IN_NAND
 
 /* Environment is in NAND */
 #if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
@@ -69,11 +31,6 @@
 #define CONFIG_ENV_OFFSET_REDUND       \
                (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT                 "nand0=gpmi-nand"
@@ -85,8 +42,6 @@
                "14m(boot),"                    \
                "238m(data),"                   \
                "-@4096k(UBI)"
-#else
-#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 /* FEC Ethernet on SoC */
@@ -94,12 +49,6 @@
 #define CONFIG_FEC_MXC
 #endif
 
-/* EEPROM */
-#ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#endif
-
 /* RTC */
 #ifdef CONFIG_CMD_DATE
 /* Use the internal RTC in the MXS chip */
@@ -118,7 +67,6 @@
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-#define CONFIG_USB_STORAGE
 #endif
 
 /* SPI */
@@ -129,8 +77,6 @@
 
 /* SPI FLASH */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SF_DEFAULT_BUS          2
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED                40000000
@@ -148,7 +94,6 @@
 #ifdef CONFIG_VIDEO
 #define        CONFIG_VIDEO_LOGO
 #define        CONFIG_SPLASH_SCREEN
-#define        CONFIG_CMD_BMP
 #define        CONFIG_BMP_16BPP
 #define        CONFIG_VIDEO_BMP_RLE8
 #define        CONFIG_VIDEO_BMP_GZIP
@@ -156,9 +101,7 @@
 #endif
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTFILE                "fitImage"
-#define CONFIG_BOOTARGS                "console=ttyAMA0,115200n8 "
 #define CONFIG_BOOTCOMMAND     "run mmc_mmc"
 #define CONFIG_LOADADDR                0x42000000
 #define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
@@ -170,6 +113,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "consdev=ttyAMA0\0"                                             \
        "baudrate=115200\0"                                             \
+       "bootscript=boot.scr\0"                                         \
        "bootdev=/dev/mmcblk0p2\0"                                      \
        "rootdev=/dev/mmcblk0p3\0"                                      \
        "netdev=eth0\0"                                                 \
@@ -236,7 +180,7 @@
        "addargs=run addcons addmtd addmisc\0"                          \
        "mmcload="                                                      \
                "mmc rescan ; "                                         \
-               "ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"       \
+               "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"           \
        "ubiload="                                                      \
                "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
                "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
@@ -280,10 +224,10 @@
        "try_bootscript="                                               \
                "mmc rescan;"                                           \
                "if test -e mmc 0:2 ${bootscript} ; then "              \
-               "if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};"   \
-               "then;"                                                 \
-                       "\techo Running bootscript...;"                 \
-                       "\tsource ${kernel_addr_r};"                    \
+               "if load mmc 0:2 ${kernel_addr_r} ${bootscript};"       \
+               "then ; "                                               \
+                       "echo Running bootscript... ; "                 \
+                       "source ${kernel_addr_r} ; "                    \
                "fi ; "                                                 \
                "fi\0"