Merge branch '2021-12-01-Kconfig-migrations' into next

[platform/kernel/u-boot.git] / include / configs / lx2160aqds.h

diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index 3dd071f..a04bbb6 100644 (file)
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -8,70 +8,14 @@
 
 #include "lx2160a_common.h"
 
-/* Qixis */
-#define QIXIS_XMAP_MASK                        0x07
-#define QIXIS_XMAP_SHIFT               5
-#define QIXIS_RST_CTL_RESET_EN         0x30
-#define QIXIS_LBMAP_DFLTBANK           0x00
-#define QIXIS_LBMAP_ALTBANK            0x20
-#define QIXIS_LBMAP_QSPI               0x00
-#define QIXIS_RCW_SRC_QSPI             0xff
-#define QIXIS_RST_CTL_RESET            0x31
-#define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
-#define QIXIS_RCFG_CTL_RECONFIG_START  0x21
-#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE  0x08
-#define QIXIS_LBMAP_MASK               0x0f
-#define QIXIS_LBMAP_SD
-#define QIXIS_LBMAP_EMMC
-#define QIXIS_RCW_SRC_SD               0x08
-#define QIXIS_RCW_SRC_EMMC         0x09
-#define NON_EXTENDED_DUTCFG
-#define QIXIS_SDID_MASK                        0x07
-#define QIXIS_ESDHC_NO_ADAPTER         0x7
-
-/* SYSCLK */
-#define QIXIS_SYSCLK_100               0x0
-#define QIXIS_SYSCLK_125               0x1
-#define QIXIS_SYSCLK_133               0x2
-
-/* DDRCLK */
-#define QIXIS_DDRCLK_100               0x0
-#define QIXIS_DDRCLK_125               0x1
-#define QIXIS_DDRCLK_133               0x2
-
-#define BRDCFG4_EMI1SEL_MASK           0xF8
-#define BRDCFG4_EMI1SEL_SHIFT          3
-#define BRDCFG4_EMI2SEL_MASK           0x07
-#define BRDCFG4_EMI2SEL_SHIFT          0
-
 /* VID */
-
-#define I2C_MUX_CH_VOL_MONITOR         0xA
-/* Voltage monitor on channel 2*/
-#define I2C_VOL_MONITOR_ADDR           0x63
-#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
-#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
-#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 #define CONFIG_VID_FLS_ENV             "lx2160aqds_vdd_mv"
 #define CONFIG_VID
-
-/* The lowest and highest voltage allowed*/
-#define VDD_MV_MIN                     775
-#define VDD_MV_MAX                     925
-
-/* PM Bus commands code for LTC3882*/
-#define PMBUS_CMD_PAGE                  0x0
-#define PMBUS_CMD_READ_VOUT             0x8B
-#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
-#define PMBUS_CMD_VOUT_COMMAND          0x21
-#define PWM_CHANNEL0                    0x0
-
 #define CONFIG_VOL_MONITOR_LTC3882_SET
 #define CONFIG_VOL_MONITOR_LTC3882_READ
 
 /* RTC */
 #define CONFIG_SYS_RTC_BUS_NUM         0
-#define I2C_MUX_CH_RTC                 0xB
 
 /*
  * MMC
@@ -85,38 +29,12 @@ u8 qixis_esdhc_detect_quirk(void);
 
 /* MAC/PHY configuration */
 #if defined(CONFIG_FSL_MC_ENET)
-#define CONFIG_MII
 #define CONFIG_ETHPRIME                "DPMAC17@rgmii-id"
-
-#define AQ_PHY_ADDR1           0x00
-#define AQ_PHY_ADDR2           0x01
-#define AQ_PHY_ADDR3           0x02
-#define AQ_PHY_ADDR4           0x03
-
-#define CORTINA_NO_FW_UPLOAD
-#define CORTINA_PHY_ADDR1      0x0
-
-#define INPHI_PHY_ADDR1                0x0
-#define INPHI_PHY_ADDR2                0x1
-
-#define RGMII_PHY_ADDR1                0x01
-#define RGMII_PHY_ADDR2                0x02
-
-#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
-#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
-#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
-#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
-
 #endif
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM              0
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS              \
@@ -131,7 +49,7 @@ u8 qixis_esdhc_detect_quirk(void);
                "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
                " bootm $load_addr#$BOARD\0"                    \
        "sd_bootcmd=echo Trying load from sd card..;"           \
-               "mmcinfo; mmc read $load_addr "                 \
+               "mmc dev 0; mmcinfo; mmc read $load_addr "                      \
                "$kernel_addr_sd $kernel_size_sd ;"             \
                "env exists secureboot && mmc read $kernelheader_addr_r "\
                "$kernelhdr_addr_sd $kernelhdr_size_sd "        \