global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace

[platform/kernel/u-boot.git] / include / configs / lx2160a_common.h

diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index b1f6760..8b2b747 100644 (file)
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -10,18 +10,13 @@
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
-#define CONFIG_FSL_MEMAC
-
-#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_FLASH_BASE          0x20000000
 
 /* DDR */
-#define CONFIG_SYS_FSL_DDR_INTLV_256B  /* force 256 byte interleaving */
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE              0x80000000UL
-#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
+#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
 #define CONFIG_SYS_DDR_BLOCK2_BASE             0x2080000000ULL
-#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS      2
 #define CONFIG_SYS_SDRAM_SIZE                  0x200000000UL
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
@@ -32,8 +27,6 @@
 #define SPD_EEPROM_ADDRESS5            0x55
 #define SPD_EEPROM_ADDRESS6            0x56
 #define SPD_EEPROM_ADDRESS             SPD_EEPROM_ADDRESS1
-#define CONFIG_SYS_SPD_BUS_NUM         0       /* SPD on I2C bus 0 */
-#define CONFIG_SYS_MONITOR_LEN         (936 * 1024)
 
 /* Miscellaneous configurable options */
 
@@ -46,7 +39,6 @@
  * will be udpated later when get_bus_freq(0) is available.
  */
 
-#define COUNTER_FREQUENCY              25000000        /* 25MHz */
 
 /* Serial Port */
 #define CONFIG_PL011_CLOCK             (get_bus_freq(0) / 4)
@@ -85,48 +77,16 @@
 #define RTC
 #define CONFIG_SYS_I2C_RTC_ADDR                0x51  /* Channel 3*/
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM              0
-
 /* Qixis */
-#define CONFIG_FSL_QIXIS
-#define CONFIG_QIXIS_I2C_ACCESS
 #define CONFIG_SYS_I2C_FPGA_ADDR               0x66
 
-/* PCI */
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-/* SATA */
-
-#ifdef CONFIG_SCSI
-#define CONFIG_SYS_SATA1               AHCI_BASE_ADDR1
-#define CONFIG_SYS_SATA2               AHCI_BASE_ADDR2
-#endif
-
 /* USB */
-#ifdef CONFIG_USB_HOST
-#ifndef CONFIG_TARGET_LX2162AQDS
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-#endif
-#endif
 
 #define COUNTER_FREQUENCY_REAL         (get_board_sys_clk() / 4)
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_SYS_MAXARGS             64      /* max command args */
-
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
-
 /* Initial environment variables */
 #define XSPI_MC_INIT_CMD                               \
        "sf probe 0:0 && "                              \
@@ -167,7 +127,6 @@
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "fdt_addr=0x64f00000\0"                 \
        "kernel_start=0x1000000\0"              \
        "kernelheader_start=0x600000\0"         \
        "scriptaddr=0x80000000\0"               \