Merge tag 'v2022.04-rc4' into next

[platform/kernel/u-boot.git] / include / configs / lx2160a_common.h

diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 4db19e2..469989a 100644 (file)
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -10,16 +10,12 @@
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
-#define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
-#define CONFIG_FSL_TZPC_BP147
 #define CONFIG_FSL_MEMAC
 
 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_FLASH_BASE          0x20000000
 
 /* DDR */
-#define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
 #define CONFIG_SYS_FSL_DDR_INTLV_256B  /* force 256 byte interleaving */
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE              0x80000000UL
@@ -38,8 +34,6 @@
 #define SPD_EEPROM_ADDRESS             SPD_EEPROM_ADDRESS1
 #define CONFIG_SYS_SPD_BUS_NUM         0       /* SPD on I2C bus 0 */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     2
-#define CONFIG_CHIP_SELECTS_PER_CTRL   4
-#define CONFIG_FSL_DDR_BIST    /* enable built-in memory test */
 #define CONFIG_SYS_MONITOR_LEN         (936 * 1024)
 
 /* Miscellaneous configurable options */
@@ -56,7 +50,6 @@
 #define COUNTER_FREQUENCY              25000000        /* 25MHz */
 
 /* Serial Port */
-#define CONFIG_PL01X_SERIAL
 #define CONFIG_PL011_CLOCK             (get_bus_freq(0) / 4)
 #define CONFIG_SYS_SERIAL0             0x21c0000
 #define CONFIG_SYS_SERIAL1             0x21d0000
@@ -67,7 +60,6 @@
                                        (void *)CONFIG_SYS_SERIAL1, \
                                        (void *)CONFIG_SYS_SERIAL2, \
                                        (void *)CONFIG_SYS_SERIAL3 }
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /* MC firmware */
 #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH                0x20000
@@ -110,20 +102,14 @@
 
 /* PCI */
 #ifdef CONFIG_PCI
-#define CONFIG_SYS_PCI_64BIT
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
 /* SATA */
 
 #ifdef CONFIG_SCSI
-#define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SATA1               AHCI_BASE_ADDR1
 #define CONFIG_SYS_SATA2               AHCI_BASE_ADDR2
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
-#define CONFIG_SYS_SCSI_MAX_LUN                1
-#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                       CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
 /* USB */
@@ -133,19 +119,7 @@
 #endif
 #endif
 
-/* GPIO */
-#ifdef CONFIG_DM_GPIO
-#ifndef CONFIG_MPC8XXX_GPIO
-#define CONFIG_MPC8XXX_GPIO
-#endif
-#endif
-
-#ifndef __ASSEMBLY__
-unsigned long get_board_sys_clk(void);
-#endif
-
-#define CONFIG_SYS_CLK_FREQ            get_board_sys_clk()
-#define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ / 4)
+#define COUNTER_FREQUENCY_REAL         (get_board_sys_clk() / 4)
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
@@ -269,12 +243,36 @@ unsigned long get_board_sys_clk(void);
                "run distro_bootcmd;run sd2_bootcmd;"           \
                "env exists secureboot && esbc_halt;"
 
+#ifdef CONFIG_CMD_USB
+#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
+#else
+#define BOOT_TARGET_DEVICES_USB(func)
+#endif
+
+#ifdef CONFIG_MMC
+#define BOOT_TARGET_DEVICES_MMC(func, instance) func(MMC, mmc, instance)
+#else
+#define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
+#ifdef CONFIG_SCSI
+#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
+#else
+#define BOOT_TARGET_DEVICES_SCSI(func)
+#endif
+
+#ifdef CONFIG_CMD_DHCP
+#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
+#else
+#define BOOT_TARGET_DEVICES_DHCP(func)
+#endif
+
 #define BOOT_TARGET_DEVICES(func) \
-       func(USB, usb, 0) \
-       func(MMC, mmc, 0) \
-       func(MMC, mmc, 1) \
-       func(SCSI, scsi, 0) \
-       func(DHCP, dhcp, na)
+       BOOT_TARGET_DEVICES_USB(func) \
+       BOOT_TARGET_DEVICES_MMC(func, 0) \
+       BOOT_TARGET_DEVICES_MMC(func, 1) \
+       BOOT_TARGET_DEVICES_SCSI(func) \
+       BOOT_TARGET_DEVICES_DHCP(func)
 #include <config_distro_bootcmd.h>
 
 #endif /* __LX2_COMMON_H */