#define CONFIG_SYS_FLASH_BASE 0x20000000
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F 1
/* DDR */
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
/* SMP Definitinos */
-#define CPU_RELEASE_ADDR secondary_boot_func
+#define CPU_RELEASE_ADDR secondary_boot_addr
/* Generic Timer Definitions */
/*
(void *)CONFIG_SYS_SERIAL1, \
(void *)CONFIG_SYS_SERIAL2, \
(void *)CONFIG_SYS_SERIAL3 }
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* MC firmware */
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
/* Initial environment variables */
-#define XSPI_MC_INIT_CMD \
- "env exists secureboot && " \
- "esbc_validate 0x20640000 && " \
- "esbc_validate 0x20680000 ;" \
- "fsl_mc start mc 0x20a00000 0x20e00000\0"
+#define XSPI_MC_INIT_CMD \
+ "sf probe 0:0 && " \
+ "sf read 0x80640000 0x640000 0x80000 && " \
+ "env exists secureboot && " \
+ "esbc_validate 0x80640000 && " \
+ "esbc_validate 0x80680000; " \
+ "sf read 0x80a00000 0xa00000 0x300000 && " \
+ "sf read 0x80e00000 0xe00000 0x100000; " \
+ "fsl_mc start mc 0x80a00000 0x80e00000\0"
#define SD_MC_INIT_CMD \
"mmc read 0x80a00000 0x5000 0x1200;" \
"esbc_validate 0x80680000 ;" \
"fsl_mc start mc 0x80a00000 0x80e00000\0"
+#define SD2_MC_INIT_CMD \
+ "mmc dev 1; mmc read 0x80a00000 0x5000 0x1200;" \
+ "mmc read 0x80e00000 0x7000 0x800;" \
+ "env exists secureboot && " \
+ "mmc read 0x80640000 0x3200 0x20 && " \
+ "mmc read 0x80680000 0x3400 0x20 && " \
+ "esbc_validate 0x80640000 && " \
+ "esbc_validate 0x80680000 ;" \
+ "fsl_mc start mc 0x80a00000 0x80e00000\0"
+
#define EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
"source ${scriptaddr}\0"
#define XSPI_NOR_BOOTCOMMAND \
- "env exists mcinitcmd && env exists secureboot "\
- "&& esbc_validate 0x206C0000; " \
+ "sf probe 0:0; " \
+ "sf read 0x806c0000 0x6c0000 0x40000; " \
+ "env exists mcinitcmd && env exists secureboot" \
+ " && esbc_validate 0x806c0000; " \
+ "sf read 0x80d00000 0xd00000 0x100000; " \
"env exists mcinitcmd && " \
- "fsl_mc lazyapply dpl 0x20d00000; " \
+ "fsl_mc lazyapply dpl 0x80d00000; " \
"run distro_bootcmd;run xspi_bootcmd; " \
"env exists secureboot && esbc_halt;"
"run distro_bootcmd;run sd_bootcmd;" \
"env exists secureboot && esbc_halt;"
+#define SD2_BOOTCOMMAND \
+ "mmc dev 1; env exists mcinitcmd && mmcinfo; " \
+ "mmc read 0x80d00000 0x6800 0x800; " \
+ "env exists mcinitcmd && env exists secureboot " \
+ " && mmc read 0x806C0000 0x3600 0x20 " \
+ "&& esbc_validate 0x806C0000;env exists mcinitcmd " \
+ "&& fsl_mc lazyapply dpl 0x80d00000;" \
+ "run distro_bootcmd;run sd2_bootcmd;" \
+ "env exists secureboot && esbc_halt;"
+
#define BOOT_TARGET_DEVICES(func) \
func(USB, usb, 0) \
func(MMC, mmc, 0) \
- func(SCSI, scsi, 0)
+ func(MMC, mmc, 1) \
+ func(SCSI, scsi, 0) \
+ func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#endif /* __LX2_COMMON_H */