Convert CONFIG_CMD_DIAG to Kconfig

[platform/kernel/u-boot.git] / include / configs / lwmon5.h

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 26136a5..7e63414 100644 (file)
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -12,19 +12,12 @@
 #define __CONFIG_H
 
 /*
- * Liebherr extra version info
- */
-#define CONFIG_IDENT_STRING    " - v2.0"
-
-/*
  * High Level Configuration Options
  */
 #define CONFIG_LWMON5          1               /* Board is lwmon5      */
 #define CONFIG_440EPX          1               /* Specific PPC440EPx   */
 #define CONFIG_440             1               /* ... PPC440 family    */
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 #define CONFIG_SYS_TEXT_BASE   0xFFF80000
 #define CONFIG_HOSTNAME                lwmon5
 
@@ -32,7 +25,6 @@
 
 #define CONFIG_4xx_DCACHE              /* enable cache in SDRAM        */
 
-#define CONFIG_BOARD_EARLY_INIT_F      /* Call board_early_init_f      */
 #define CONFIG_BOARD_EARLY_INIT_R      /* Call board_early_init_r      */
 #define CONFIG_BOARD_POSTCLK_INIT      /* Call board_postclk_init      */
 #define CONFIG_MISC_INIT_R             /* Call misc_init_r             */
@@ -103,12 +95,10 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      2       /* Use UART1                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK             /* no external clock provided   */
-#define CONFIG_BAUDRATE                115200
 
 #define CONFIG_SYS_BAUDRATE_TABLE                                              \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -263,7 +253,6 @@
 /* Reserve GPT0_COMP1-COMP5 for logbuffer header */
 #define CONFIG_ALT_LH_ADDR     (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1)
 #define CONFIG_ALT_LB_ADDR     (CONFIG_SYS_OCM_BASE)
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 /*
  * I2C
@@ -302,16 +291,9 @@
                                         CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\
                                         CONFIG_SYS_I2C_DSPIC_IO_ADDR }
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 /* Update size in "reg" property of NOR FLASH device tree nodes */
 #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 
-#define CONFIG_FIT                     /* enable FIT image support     */
-
 #define        CONFIG_POST_KEY_MAGIC   "3C+3E" /* press F3 + F5 keys to force POST */
 
 #define        CONFIG_PREBOOT          "setenv bootdelay 15"
@@ -350,7 +332,6 @@
        ""
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
@@ -370,17 +351,12 @@
 #define CONFIG_PHY1_ADDR       1
 
 /* Video console */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_MB862xx
 #define CONFIG_VIDEO_MB862xx_ACCEL
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
 #define VIDEO_FB_16BPP_PIXEL_SWAP
 #define VIDEO_FB_16BPP_WORD_SWAP
 
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 
 /*
@@ -392,12 +368,8 @@
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
-#define CONFIG_USB_STORAGE
 
 /* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 
 /*
  * BOOTP options
@@ -410,26 +382,13 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
 
-#ifdef CONFIG_VIDEO
-#define CONFIG_CMD_BMP
-#endif
-
 #ifdef CONFIG_440EPX
-#define CONFIG_CMD_USB
 #endif
 
 /*
@@ -439,8 +398,6 @@
 
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
 
-#define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
 #else
@@ -457,11 +414,7 @@
 #define CONFIG_SYS_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
-#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup*/
 
 #ifndef DEBUG
 #define CONFIG_HW_WATCHDOG     1       /* Use external HW-Watchdog     */