#define CONFIG_LWMON 1 /* ...on a LWMON board */
#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
+#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */
#define CONFIG_LCD 1 /* use LCD controller ... */
#define CONFIG_HLD1045 1 /* ... with a HLD1045 display */
+#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
+
#if 1
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
#else
CFG_POST_I2C | \
CFG_POST_SPI | \
CFG_POST_USB | \
- CFG_POST_SPR)
+ CFG_POST_SPR | \
+ CFG_POST_SYSMON)
#define CONFIG_BOOTCOMMAND "run flash_self"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_addr=40080000\0" \
- "ramdisk_addr=40280000\0" \
- "magic_keys=#3\0" \
- "key_magic#=28\0" \
- "key_cmd#=setenv addfb setenv bootargs \\$(bootargs) console=tty0\0" \
- "key_magic3=3C+3F\0" \
- "key_cmd3=echo *** Entering Test Mode ***;" \
- "setenv add_misc setenv bootargs \\$(bootargs) testmode\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addfb=setenv bootargs $(bootargs) console=ttyS1,$(baudrate)\0" \
- "addip=setenv bootargs $(bootargs) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off " \
- "panic=1\0" \
- "add_wdt=setenv bootargs $(bootargs) $(wdt_args)\0" \
- "add_misc=setenv bootargs $(bootargs) runmode\0" \
- "flash_nfs=run nfsargs addip add_wdt addfb add_misc;" \
- "bootm $(kernel_addr)\0" \
- "flash_self=run ramargs addip add_wdt addfb add_misc;" \
- "bootm $(kernel_addr) $(ramdisk_addr)\0" \
- "net_nfs=tftp 100000 /tftpboot/pImage.lwmon;" \
- "run nfsargs addip add_wdt addfb;bootm\0" \
- "rootpath=/opt/eldk/ppc_8xx\0" \
- "load=tftp 100000 /tftpboot/u-boot.bin\0" \
- "update=protect off 1:0;era 1:0;cp.b 100000 40000000 $(filesize)\0" \
- "wdt_args=wdt_8xx=off\0" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr=40080000\0" \
+ "ramdisk_addr=40280000\0" \
+ "magic_keys=#3\0" \
+ "key_magic#=28\0" \
+ "key_cmd#=setenv addfb setenv 'bootargs $bootargs console=tty0'\0" \
+ "key_magic3=3C+3F\0" \
+ "key_cmd3=echo *** Entering Test Mode ***;" \
+ "setenv add_misc 'setenv bootargs $bootargs testmode'\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addfb=setenv bootargs $bootargs console=ttyS1,$baudrate\0" \
+ "addip=setenv bootargs $bootargs " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
+ "panic=1\0" \
+ "add_wdt=setenv bootargs $bootargs $wdt_args\0" \
+ "add_misc=setenv bootargs $bootargs runmode\0" \
+ "flash_nfs=run nfsargs addip add_wdt addfb add_misc;" \
+ "bootm $kernel_addr\0" \
+ "flash_self=run ramargs addip add_wdt addfb add_misc;" \
+ "bootm $kernel_addr $ramdisk_addr\0" \
+ "net_nfs=tftp 100000 /tftpboot/uImage.lwmon;" \
+ "run nfsargs addip add_wdt addfb;bootm\0" \
+ "rootpath=/opt/eldk/ppc_8xx\0" \
+ "load=tftp 100000 /tftpboot/u-boot.bin\0" \
+ "update=protect off 1:0;era 1:0;cp.b 100000 40000000 $filesize\0" \
+ "wdt_args=wdt_8xx=off\0" \
"verify=no"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
else immr->im_cpm.cp_pbdat &= ~PB_SDA
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY udelay(1) /* 1/4 I2C clock duration */
+#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
#endif /* CONFIG_SOFT_I2C */
#ifdef CONFIG_8xx_CONS_SCC2 /* Can't use ethernet, then */
#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) | \
+ CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
CFG_CMD_I2C | \
CFG_CMD_EEPROM | \
CFG_CMD_IDE | \
CFG_CMD_BSP | \
+ CFG_CMD_BMP | \
CFG_CMD_POST_DIAG )
#else
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
CFG_CMD_DATE | \
CFG_CMD_I2C | \
CFG_CMD_EEPROM | \
CFG_CMD_IDE | \
CFG_CMD_BSP | \
+ CFG_CMD_BMP | \
CFG_CMD_POST_DIAG )
#endif
#define CONFIG_MAC_PARTITION
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#undef CFG_HUSH_PARSER /* enable "hush" shell */
+#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*
+ * When the watchdog is enabled, output must be fast enough in Linux.
+ */
+#ifdef CONFIG_WATCHDOG
+#define CFG_BAUDRATE_TABLE { 38400, 57600, 115200 }
+#else
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#endif
+
+/*----------------------------------------------------------------------*/
+#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */
+#undef CONFIG_MODEM_SUPPORT_DEBUG
+
+#define CONFIG_MODEM_KEY_MAGIC "3C+3F" /* press F3 + F6 keys to enable modem */
+#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
+#if 0
+#define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */
+#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */
+#endif
+/*----------------------------------------------------------------------*/
/*
* Low Level Configuration Settings
*/
#define CFG_INIT_RAM_ADDR CFG_IMMR
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE 68 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
*-----------------------------------------------------------------------
*
*/
-/*#define CFG_DER 0x2002000F*/
#define CFG_DER 0
/*