Convert CONFIG_SF_DEFAULT_* to Kconfig

[platform/kernel/u-boot.git] / include / configs / lsxl.h

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index 19ee5bc..bcad8a0 100644 (file)
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -1,24 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2012 Michael Walle
  * Michael Walle <michael@walle.cc>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_LSXL_H
 #define _CONFIG_LSXL_H
 
-
 /*
  * Version number information
  */
 #if defined(CONFIG_LSCHLV2)
-#define CONFIG_IDENT_STRING " LS-CHLv2"
 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
 #define CONFIG_MACH_TYPE 3006
 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
 #elif defined(CONFIG_LSXHL)
-#define CONFIG_IDENT_STRING " LS-XHL"
 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
 #define CONFIG_MACH_TYPE 2663
 /* CONFIG_SYS_TCLK is 200000000 by default */
@@ -33,40 +29,13 @@
 #define CONFIG_KW88F6281               /* SOC Name */
 
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-#define CONFIG_MISC_INIT_R
 #define CONFIG_SHOW_BOOT_PROGRESS
 
 #define CONFIG_KIRKWOOD_GPIO
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/*
- * Enable u-boot API for standalone programs.
- */
-#define CONFIG_API
 
 /*
  * Commands configuration
  */
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FS_GENERIC
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -75,16 +44,10 @@
 #include "mv-common.h"
 
 /* loading initramfs images without uimage header */
-#define CONFIG_SUPPORT_RAW_INITRD
 
 /* ST M25P40 */
 #undef CONFIG_ENV_SPI_MAX_HZ
 #define CONFIG_ENV_SPI_MAX_HZ          25000000
-#undef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED                25000000
-
-
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 /*
  *  Environment variables configurations
@@ -92,10 +55,7 @@
 #ifdef CONFIG_SPI_FLASH
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
 #define CONFIG_SYS_MAX_FLASH_SECT      8
-#define CONFIG_ENV_IS_IN_SPI_FLASH     1
 #define CONFIG_ENV_SECT_SIZE           0x10000 /* 64K */
-#else
-#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 #define CONFIG_ENV_SIZE                        0x10000 /* 64k */
@@ -105,8 +65,6 @@
  * Default environment variables
  */
 #define CONFIG_LOADADDR                0x00800000
-#define CONFIG_BOOTCOMMAND     "run bootcmd_${bootsource}"
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/sda2"
 
 #if defined(CONFIG_LSXHL)
 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
@@ -177,8 +135,7 @@
 #undef CONFIG_RESET_PHY_R
 #endif /* CONFIG_CMD_NET */
 
-#ifdef CONFIG_CMD_IDE
-#undef CONFIG_IDE_LED
+#ifdef CONFIG_IDE
 #undef CONFIG_SYS_IDE_MAXBUS
 #define CONFIG_SYS_IDE_MAXBUS          1
 #undef CONFIG_SYS_IDE_MAXDEVICE