projects / platform / kernel / u-boot.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
Convert CONFIG_SPL_PAD_TO et al to Kconfig
[platform/kernel/u-boot.git] / include / configs / ls2080ardb.h
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 45f70b1..cdfc9fd 100644 (file)
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -9,21 +9,9 @@
 
 #include "ls2080a_common.h"
 
-#ifdef CONFIG_FSL_QSPI
-#ifdef CONFIG_TARGET_LS2081ARDB
-#define CONFIG_QIXIS_I2C_ACCESS
-#endif
-#endif
-
 #define I2C_MUX_CH_VOL_MONITOR         0xa
 #define I2C_VOL_MONITOR_ADDR           0x38
-#define CONFIG_VOL_MONITOR_IR36021_READ
-#define CONFIG_VOL_MONITOR_IR36021_SET
 
-#define CONFIG_VID_FLS_ENV             "ls2080ardb_vdd_mv"
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_VID
-#endif
 /* step the IR regulator in 5mV increments */
 #define IR_VDD_STEP_DOWN               5
 #define IR_VDD_STEP_UP                 5
@@ -31,12 +19,7 @@
 #define VDD_MV_MIN                     819
 #define VDD_MV_MAX                     1212
 
-#ifndef __ASSEMBLY__
-unsigned long get_board_sys_clk(void);
-#endif
-
-#define CONFIG_SYS_CLK_FREQ            get_board_sys_clk()
-#define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ/4)
+#define COUNTER_FREQUENCY_REAL         (get_board_sys_clk()/4)
 
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS1    0x51
@@ -47,23 +30,15 @@ unsigned long get_board_sys_clk(void);
 #define SPD_EEPROM_ADDRESS6    0x56    /* dummy address */
 #define SPD_EEPROM_ADDRESS     SPD_EEPROM_ADDRESS1
 #define CONFIG_SYS_SPD_BUS_NUM 0       /* SPD on I2C bus 0 */
-#define CONFIG_DIMM_SLOTS_PER_CTLR             2
-#define CONFIG_CHIP_SELECTS_PER_CTRL           4
 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR      1
 #endif
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
 
 #define CONFIG_SYS_SATA1                       AHCI_BASE_ADDR1
 #define CONFIG_SYS_SATA2                       AHCI_BASE_ADDR2
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
-
 #if !defined(CONFIG_FSL_QSPI) || defined(CONFIG_TFABOOT)
 
 #define CONFIG_SYS_NOR0_CSPR_EXT       (0x0)
@@ -98,7 +73,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS     45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      1024    /* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
@@ -108,7 +82,6 @@ unsigned long get_board_sys_clk(void);
                                         CONFIG_SYS_FLASH_BASE + 0x40000000}
 #endif
 
-#define CONFIG_NAND_FSL_IFC
 #define CONFIG_SYS_NAND_MAX_ECCPOS     256
 #define CONFIG_SYS_NAND_MAX_OOBFREE    2
 
@@ -145,7 +118,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CONFIG_FSL_QIXIS       /* use common QIXIS code */
 #define QIXIS_LBMAP_SWITCH             0x06
 #define QIXIS_LBMAP_MASK               0x0f
 #define QIXIS_LBMAP_SHIFT              0
@@ -202,8 +174,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS0_FTIM2           CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS0_FTIM3           CONFIG_SYS_NAND_FTIM3
 
-#define CONFIG_SPL_PAD_TO              0x80000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    (1024 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (512 * 1024)
 #else
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NOR0_CSPR_EXT
@@ -232,7 +202,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
 #ifdef CONFIG_TARGET_LS2081ARDB
-#define CONFIG_FSL_QIXIS       /* use common QIXIS code */
 #define QIXIS_QMAP_MASK                        0x07
 #define QIXIS_QMAP_SHIFT               5
 #define QIXIS_LBMAP_DFLTBANK           0x00
@@ -260,9 +229,6 @@ unsigned long get_board_sys_clk(void);
 #define I2C_MUX_CH_DEFAULT      0x8
 
 /* SPI */
-#if defined(CONFIG_FSL_DSPI)
-#define CONFIG_SPI_FLASH_STMICRO
-#endif
 
 /*
  * RTC configuration
@@ -356,7 +322,6 @@ unsigned long get_board_sys_clk(void);
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "fdt_addr=0x64f00000\0"                 \
        "kernel_addr=0x581000000\0"             \
        "kernel_start=0x1000000\0"              \
        "kernelheader_start=0x800000\0"         \
@@ -419,7 +384,6 @@ unsigned long get_board_sys_clk(void);
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "fdt_addr=0x64f00000\0"                 \
        "kernel_addr=0x581000000\0"             \
        "kernel_start=0x1000000\0"              \
        "kernelheader_start=0x600000\0"         \
@@ -509,38 +473,12 @@ unsigned long get_board_sys_clk(void);
                        "run distro_bootcmd;run nor_bootcmd; "          \
                        "env exists secureboot && esbc_halt;"
 #else
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_QSPI_BOOT
 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND                                             \
-                       "sf probe 0:0; "                                \
-                       "sf read 0x806c0000 0x6c0000 0x40000; "         \
-                       "env exists mcinitcmd && env exists secureboot "\
-                       "&& esbc_validate 0x806C0000; "                 \
-                       "sf read 0x80d00000 0xd00000 0x100000; "        \
-                       "env exists mcinitcmd && "                      \
-                       "fsl_mc lazyapply dpl 0x80d00000; "             \
-                       "run distro_bootcmd;run qspi_bootcmd; "         \
-                       "env exists secureboot && esbc_halt;"
 #elif defined(CONFIG_SD_BOOT)
 /* Try to boot an on-SD kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND                                             \
-                       "env exists mcinitcmd && env exists secureboot "\
-                       "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
-                       "&& esbc_validate $load_addr; "                 \
-                       "env exists mcinitcmd && run mcinitcmd "        \
-                       "&& mmc read 0x88000000 0x6800 0x800 "          \
-                       "&& fsl_mc lazyapply dpl 0x88000000; "          \
-                       "run distro_bootcmd;run sd_bootcmd; "           \
-                       "env exists secureboot && esbc_halt;"
 #else
 /* Try to boot an on-NOR kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND                                             \
-                       "env exists mcinitcmd && env exists secureboot "\
-                       "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
-                       "&& fsl_mc lazyapply dpl 0x580d00000;"          \
-                       "run distro_bootcmd;run nor_bootcmd; "          \
-                       "env exists secureboot && esbc_halt;"
 #endif
 #endif
 
@@ -554,7 +492,6 @@ unsigned long get_board_sys_clk(void);
 #define AQ_PHY_ADDR3           0x02
 #define AQ_PHY_ADDR4           0x03
 #define AQR405_IRQ_MASK                0x36
-#define CONFIG_ETHPRIME                "DPMAC1@xgmii"
 
 #include <asm/fsl_secure_boot.h>
 
Domain: System / Kernel;