configs: Migrate CMD_NAND*

[platform/kernel/u-boot.git] / include / configs / ls2080ardb.h

diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 3774b17..2a6aa8e 100644 (file)
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -68,7 +68,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
 
 #define CONFIG_SYS_SATA1                       AHCI_BASE_ADDR1
 #define CONFIG_SYS_SATA2                       AHCI_BASE_ADDR2
@@ -164,7 +163,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 #define CONFIG_FSL_QIXIS       /* use common QIXIS code */
@@ -224,7 +222,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS0_FTIM2           CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS0_FTIM3           CONFIG_SYS_NAND_FTIM3
 
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              (2048 * 1024)
 #define CONFIG_ENV_SECT_SIZE           0x20000
 #define CONFIG_ENV_SIZE                        0x2000
@@ -250,8 +247,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS2_FTIM2           CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS2_FTIM3           CONFIG_SYS_NAND_FTIM3
 
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE           0x20000
 #define CONFIG_ENV_SIZE                        0x2000
 #endif
@@ -321,7 +317,6 @@ unsigned long get_board_sys_clk(void);
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM      0
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
@@ -350,7 +345,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 
 #undef CONFIG_CMDLINE_EDITING
 #include <config_distro_defaults.h>
@@ -378,15 +372,15 @@ unsigned long get_board_sys_clk(void);
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "kernel_start=0x581100000\0"            \
+       "kernel_start=0x581000000\0"            \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
        "mcmemsize=0x40000000\0"                \
        "fdtfile=fsl-ls2080a-rdb.dtb\0"         \
-       "mcinitcmd=esbc_validate 0x580c80000;"  \
-       "esbc_validate 0x580cc0000;"            \
-       "fsl_mc start mc 0x580300000"           \
-       " 0x580800000 \0"                       \
+       "mcinitcmd=esbc_validate 0x580700000;"  \
+       "esbc_validate 0x580740000;"            \
+       "fsl_mc start mc 0x580a00000"           \
+       " 0x580e00000 \0"                       \
        BOOTENV
 #else
 #ifdef CONFIG_QSPI_BOOT
@@ -421,13 +415,13 @@ unsigned long get_board_sys_clk(void);
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "kernel_start=0x581100000\0"            \
+       "kernel_start=0x581000000\0"            \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
        "mcmemsize=0x40000000\0"                \
        "fdtfile=fsl-ls2080a-rdb.dtb\0"         \
-       "mcinitcmd=fsl_mc start mc 0x580300000" \
-       " 0x580800000 \0"                       \
+       "mcinitcmd=fsl_mc start mc 0x580a00000" \
+       " 0x580e00000 \0"                       \
        BOOTENV
 #endif
 #endif
@@ -447,7 +441,7 @@ unsigned long get_board_sys_clk(void);
                           " || run distro_bootcmd"
 #else
 /* Try to boot an on-NOR kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \
+#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \
                           " && cp.b $kernel_start $kernel_load $kernel_size" \
                           " && bootm $kernel_load" \
                           " || run distro_bootcmd"
@@ -463,7 +457,7 @@ unsigned long get_board_sys_clk(void);
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_CORTINA_FW_ADDR         0x20980000
 #else
-#define CONFIG_CORTINA_FW_ADDR         0x581000000
+#define CONFIG_CORTINA_FW_ADDR         0x580980000
 #endif
 #define CONFIG_CORTINA_FW_LENGTH       0x40000