configs: Remove a number of unreferenced CONFIG options.

[platform/kernel/u-boot.git] / include / configs / ls2080aqds.h

diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 27fd397..f6efda2 100644 (file)
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -9,18 +9,12 @@
 
 #include "ls2080a_common.h"
 
-#ifndef __ASSEMBLY__
-unsigned long get_board_sys_clk(void);
-#endif
-
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_QIXIS_I2C_ACCESS
 #define CONFIG_SYS_I2C_IFDR_DIV                0x7e
 #endif
 
 #define CONFIG_SYS_I2C_FPGA_ADDR       0x66
-#define CONFIG_SYS_CLK_FREQ            get_board_sys_clk()
-#define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ/4)
+#define COUNTER_FREQUENCY_REAL         (get_board_sys_clk()/4)
 
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS1    0x51
@@ -30,23 +24,6 @@ unsigned long get_board_sys_clk(void);
 #define SPD_EEPROM_ADDRESS5    0x55
 #define SPD_EEPROM_ADDRESS6    0x56    /* dummy address */
 #define SPD_EEPROM_ADDRESS     SPD_EEPROM_ADDRESS1
-#define CONFIG_SYS_SPD_BUS_NUM 0       /* SPD on I2C bus 0 */
-#define CONFIG_DIMM_SLOTS_PER_CTLR             2
-#define CONFIG_CHIP_SELECTS_PER_CTRL           4
-#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR      1
-#endif
-
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA1                       AHCI_BASE_ADDR1
-#define CONFIG_SYS_SATA2                       AHCI_BASE_ADDR2
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
 
 #define CONFIG_SYS_NOR0_CSPR_EXT       (0x0)
 #define CONFIG_SYS_NOR_AMASK           IFC_AMASK(128*1024*1024)
@@ -87,15 +64,8 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_IFC_CCR     0x01000000
 
 #ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS     45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT      1024    /* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE,\
                                         CONFIG_SYS_FLASH_BASE + 0x40000000}
 #endif
@@ -136,7 +106,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CONFIG_FSL_QIXIS       /* use common QIXIS code */
 #define QIXIS_LBMAP_SWITCH             0x06
 #define QIXIS_LBMAP_MASK               0x0f
 #define QIXIS_LBMAP_SHIFT              0
@@ -207,8 +176,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS0_FTIM2           CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS0_FTIM3           CONFIG_SYS_NAND_FTIM3
 
-#define CONFIG_SPL_PAD_TO              0x20000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (640 * 1024)
 #endif
 #else
@@ -241,10 +208,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS2_FTIM3           CONFIG_SYS_NAND_FTIM3
 #endif
 
-/* Debug Server firmware */
-#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
-#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR        0x580D00000ULL
-
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
 /*
@@ -257,15 +220,7 @@ unsigned long get_board_sys_clk(void);
 #define I2C_MUX_CH_DEFAULT      0x8
 
 /* SPI */
-#ifdef CONFIG_FSL_DSPI
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_EON
-#endif
 
-#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
-#endif
 /*
  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
@@ -274,21 +229,11 @@ unsigned long get_board_sys_clk(void);
 #define FSL_QIXIS_BRDCFG9_QSPI         0x1
 
 /*
- * MMC
- */
-#ifdef CONFIG_MMC
-#define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
-       QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
-#endif
-
-/*
  * RTC configuration
  */
 #define RTC
 #define CONFIG_RTC_DS3231               1
-#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT
 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
-#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT
 
 /* EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_NXID
@@ -296,10 +241,6 @@ unsigned long get_board_sys_clk(void);
 
 #define CONFIG_FSL_MEMAC
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #ifdef CONFIG_NXP_ESBC
@@ -443,7 +384,7 @@ unsigned long get_board_sys_clk(void);
                        "env exists secureboot && esbc_halt;"
 #endif
 
-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_FSL_MC_ENET)
 #define CONFIG_FSL_MEMAC
 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
@@ -467,8 +408,6 @@ unsigned long get_board_sys_clk(void);
 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 
-#define CONFIG_ETHPRIME                "DPMAC1@xgmii"
-
 #endif
 
 #include <asm/fsl_secure_boot.h>