Merge git://git.denx.de/u-boot-fsl-qoriq

[platform/kernel/u-boot.git] / include / configs / ls2080aqds.h

diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index df1455b..d0b0aa9 100644 (file)
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright 2017 NXP
  * Copyright 2015 Freescale Semiconductor
  *
  * SPDX-License-Identifier:    GPL-2.0+
@@ -9,17 +10,12 @@
 
 #include "ls2080a_common.h"
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
 #endif
 
-#define CONFIG_SYS_FSL_CLK
-
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_SYS_NO_FLASH
 #undef CONFIG_CMD_IMLS
 #define CONFIG_QIXIS_I2C_ACCESS
 #define CONFIG_SYS_I2C_EARLY_INIT
@@ -55,8 +51,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SATA1                       AHCI_BASE_ADDR1
 #define CONFIG_SYS_SATA2                       AHCI_BASE_ADDR2
@@ -106,7 +100,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NOR_FTIM3   0x04000000
 #define CONFIG_SYS_IFC_CCR     0x01000000
 
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
@@ -269,15 +263,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CS2_FTIM2           CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS2_FTIM3           CONFIG_SYS_NAND_FTIM3
 
-#if defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_TEXT_BASE           0x20010000
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x100000        /* 1MB */
-#define CONFIG_ENV_SECT_SIZE           0x10000
-#else
+#ifndef CONFIG_QSPI_BOOT
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE           0x20000
 #define CONFIG_ENV_SIZE                        0x2000
 #endif
@@ -336,11 +324,9 @@ unsigned long get_board_ddr_clk(void);
 #define RTC
 #define CONFIG_RTC_DS3231               1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
-#define CONFIG_CMD_DATE
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM      0
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
@@ -349,26 +335,21 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
 #define CONFIG_FSL_MEMAC
-#define CONFIG_PCI             /* Enable PCIE */
-#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 
 #ifdef CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif
 
 /*  MMC  */
-#define CONFIG_MMC
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
        "loadaddr=0x80100000\0"                 \
@@ -377,11 +358,31 @@ unsigned long get_board_ddr_clk(void);
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "kernel_start=0x581100000\0"            \
+       "kernel_start=0x581000000\0"            \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
-       "mcinitcmd=fsl_mc start mc 0x580300000" \
-       " 0x580800000 \0"
+       "mcmemsize=0x40000000\0"                \
+       "mcinitcmd=esbc_validate 0x580700000;"  \
+       "esbc_validate 0x580740000;"            \
+       "fsl_mc start mc 0x580a00000"           \
+       " 0x580e00000 \0"
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
+       "loadaddr=0x80100000\0"                 \
+       "kernel_addr=0x100000\0"                \
+       "ramdisk_addr=0x800000\0"               \
+       "ramdisk_size=0x2000000\0"              \
+       "fdt_high=0xa0000000\0"                 \
+       "initrd_high=0xffffffffffffffff\0"      \
+       "kernel_start=0x581000000\0"            \
+       "kernel_load=0xa0000000\0"              \
+       "kernel_size=0x2800000\0"               \
+       "mcmemsize=0x40000000\0"                \
+       "mcinitcmd=fsl_mc start mc 0x580a00000" \
+       " 0x580e00000 \0"
+#endif /* CONFIG_SECURE_BOOT */
+
 
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC
@@ -425,7 +426,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT                2
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE
 
 #include <asm/fsl_secure_boot.h>