powerpc, 8xx: remove support for 8xx

[platform/kernel/u-boot.git] / include / configs / ls2080aqds.h

diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 84e9db2..8a8ee9d 100644 (file)
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -166,12 +166,14 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_LBMAP_DFLTBANK           0x00
 #define QIXIS_LBMAP_ALTBANK            0x04
 #define QIXIS_LBMAP_NAND               0x09
+#define QIXIS_LBMAP_SD                 0x00
 #define QIXIS_LBMAP_QSPI               0x0f
 #define QIXIS_RST_CTL_RESET            0x31
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START  0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE  0x08
 #define QIXIS_RCW_SRC_NAND             0x107
+#define QIXIS_RCW_SRC_SD               0x40
 #define QIXIS_RCW_SRC_QSPI             0x62
 #define        QIXIS_RST_FORCE_MEM             0x01
 
@@ -198,7 +200,8 @@ unsigned long get_board_ddr_clk(void);
                                        FTIM2_GPCM_TWP(0x3E))
 #define CONFIG_SYS_CS3_FTIM3           0x0
 
-#if defined(CONFIG_SPL) && defined(CONFIG_NAND)
+#if defined(CONFIG_SPL)
+#if defined(CONFIG_NAND_BOOT)
 #define CONFIG_SYS_CSPR1_EXT           CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR1               CONFIG_SYS_NOR0_CSPR_EARLY
 #define CONFIG_SYS_CSPR1_FINAL         CONFIG_SYS_NOR0_CSPR
@@ -234,6 +237,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_PAD_TO              0x20000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (640 * 1024)
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET              0x200000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#define CONFIG_ENV_SIZE                        0x20000
+#endif
 #else
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NOR0_CSPR_EARLY
@@ -327,7 +336,6 @@ unsigned long get_board_ddr_clk(void);
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM      0
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
@@ -367,6 +375,22 @@ unsigned long get_board_ddr_clk(void);
        "esbc_validate 0x580740000;"            \
        "fsl_mc start mc 0x580a00000"           \
        " 0x580e00000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
+       "loadaddr=0x90100000\0"                 \
+       "kernel_addr=0x800\0"                \
+       "ramdisk_addr=0x800000\0"               \
+       "ramdisk_size=0x2000000\0"              \
+       "fdt_high=0xa0000000\0"                 \
+       "initrd_high=0xffffffffffffffff\0"      \
+       "kernel_start=0x8000\0"              \
+       "kernel_load=0xa0000000\0"              \
+       "kernel_size=0x14000\0"               \
+       "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
+       "mmc read 0x80100000 0x7000 0x800;" \
+       "fsl_mc start mc 0x80000000 0x80100000\0"       \
+       "mcmemsize=0x70000000 \0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
@@ -385,7 +409,7 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_SECURE_BOOT */
 
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 #define CONFIG_FSL_MEMAC
 #define        CONFIG_PHYLIB
 #define CONFIG_PHYLIB_10G