Merge branch 'master' of git://git.denx.de/u-boot-sunxi

[platform/kernel/u-boot.git] / include / configs / ls2080a_common.h

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 4e6a26c..c7d8a3b 100644 (file)
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -1,40 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2017 NXP
  * Copyright (C) 2014 Freescale Semiconductor
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS2_COMMON_H
 #define __LS2_COMMON_H
 
 #define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
-#define CONFIG_MP
 #define CONFIG_GICV3
-#define CONFIG_FSL_TZPC_BP147
 
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 
 /* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 
 /* We need architecture specific misc initializations */
 
 /* Link Definitions */
+#ifndef CONFIG_TFABOOT
 #ifndef CONFIG_QSPI_BOOT
 #else
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
 #define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x40000
 #endif
+#endif
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#ifndef CONFIG_SPL
-#define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
-#endif
 #ifndef CONFIG_SYS_FSL_DDR4
 #define CONFIG_SYS_DDR_RAW_TIMING
 #endif
@@ -77,11 +76,6 @@
 
 /* I2C */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_MXC_I2C4                /* enable I2C bus 4 */
 
 /* Serial Port */
 #define CONFIG_SYS_NS16550_SERIAL
@@ -158,7 +152,7 @@ unsigned long long get_qixis_addr(void);
  * 512MB aligned, so the min size to hide is 512MB.
  */
 #ifdef CONFIG_FSL_MC_ENET
-#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE           (512UL * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE           (128UL * 1024 * 1024)
 #endif
 
 /* Command line configuration */
@@ -170,8 +164,6 @@ unsigned long long get_qixis_addr(void);
 /* fixme: these need to be checked against the board */
 #define CONFIG_CHIP_SELECTS_PER_CTRL   4
 
-#define CONFIG_NR_DRAM_BANKS           3
-
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
@@ -194,6 +186,7 @@ unsigned long long get_qixis_addr(void);
        "mcinitcmd=fsl_mc start mc 0x580a00000" \
        " 0x580e00000 \0"
 
+#ifndef CONFIG_TFABOOT
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_BOOTCOMMAND     "mmc read 0x80200000 0x6800 0x800;"\
                                " fsl_mc apply dpl 0x80200000 &&" \
@@ -204,6 +197,7 @@ unsigned long long get_qixis_addr(void);
                                " cp.b $kernel_start $kernel_load" \
                                " $kernel_size && bootm $kernel_load"
 #endif
+#endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
@@ -214,7 +208,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SPL_MAX_SIZE            0x16000
 #define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE           0x1800a000
 
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x80400000