Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls2080a_common.h

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index ebe1415..851db61 100644 (file)
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -9,16 +9,12 @@
 
 #define CONFIG_REMAKE_ELF
 #define CONFIG_FSL_LAYERSCAPE
-#define CONFIG_FSL_LSCH3
 #define CONFIG_MP
 #define CONFIG_GICV3
 #define CONFIG_FSL_TZPC_BP147
 
 #include <asm/arch/ls2080a_stream_id.h>
 #include <asm/arch/config.h>
-#if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2))
-#define        CONFIG_SYS_HAS_SERDES
-#endif
 
 /* Link Definitions */
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
@@ -44,13 +40,11 @@
 #define CONFIG_SUPPORT_RAW_INITRD
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F      1
 
 #ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
 #endif
 #ifndef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDR3            /* Use DDR3 memory */
 #define CONFIG_SYS_DDR_RAW_TIMING
 #endif
 
@@ -102,7 +96,7 @@
 #define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
-#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
@@ -153,11 +147,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_NAND_BASE                   0x530000000ULL
 #define CONFIG_SYS_NAND_BASE_PHYS              0x30000000
 
-/* Debug Server firmware */
-#define CONFIG_FSL_DEBUG_SERVER
-/* 2 sec timeout */
-#define CONFIG_SYS_DEBUG_SERVER_TIMEOUT                        (2 * 1000 * 1000)
-
 /* MC firmware */
 #define CONFIG_FSL_MC_ENET
 /* TODO Actual DPL max length needs to be confirmed with the MC FW team */
@@ -175,43 +164,16 @@ unsigned long long get_qixis_addr(void);
  * It will be used by MC and Debug Server. The MC region must be
  * 512MB aligned, so the min size to hide is 512MB.
  */
-#if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER)
-#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE    (254UL * 1024 * 1024)
+#ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE           (512UL * 1024 * 1024)
 #define CONFIG_SYS_MC_RSV_MEM_ALIGN                    (512UL * 1024 * 1024)
 #endif
 
-/* PCIe */
-#define CONFIG_PCIE1           /* PCIE controller 1 */
-#define CONFIG_PCIE2           /* PCIE controller 2 */
-#define CONFIG_PCIE3           /* PCIE controller 3 */
-#define CONFIG_PCIE4           /* PCIE controller 4 */
-#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
-#ifdef CONFIG_LS2080A
-#define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
-#endif
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF  0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE      0x00001000      /* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF  0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE      0x00001000      /* 4k */
-
-#define CONFIG_SYS_PCIE_IO_BUS         0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF    0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE                0x00010000      /* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS                0x40000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF   0x40000000
-#define CONFIG_SYS_PCIE_MEM_SIZE       0x40000000      /* 1G */
-
 /* Command line configuration */
 #define CONFIG_CMD_ENV
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
-#define CONFIG_ARCH_EARLY_INIT_R
 
 /* Physical Memory Map */
 /* fixme: these need to be checked against the board */
@@ -222,8 +184,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-#define CONFIG_DISPLAY_CPUINFO
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
@@ -265,17 +225,9 @@ unsigned long long get_qixis_addr(void);
 
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_MAX_SIZE            0x16000
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE           0x1800a000