projects / platform / kernel / u-boot.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI
[platform/kernel/u-boot.git] / include / configs / ls1088ardb.h
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 16e0486..f82b618 100644 (file)
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2020 NXP
+ * Copyright 2017, 2020-2021 NXP
  */
 
 #ifndef __LS1088A_RDB_H
@@ -8,8 +8,6 @@
 
 #include "ls1088a_common.h"
 
-#define CONFIG_SYS_MMC_ENV_DEV         0
-
 #if defined(CONFIG_TFABOOT) || \
        defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #ifndef CONFIG_SPL_BUILD
@@ -19,18 +17,12 @@
 #endif
 
 #define CONFIG_SYS_CLK_FREQ            100000000
-#define CONFIG_DDR_CLK_FREQ            100000000
 #define COUNTER_FREQUENCY_REAL         25000000        /* 25MHz */
 #define COUNTER_FREQUENCY              25000000        /* 25MHz */
 
-#define CONFIG_DDR_SPD
 #ifdef CONFIG_EMU
 #define CONFIG_SYS_FSL_DDR_EMU
-#define CONFIG_SYS_MXC_I2C1_SPEED      40000000
-#define CONFIG_SYS_MXC_I2C2_SPEED      40000000
 #else
-#define CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
 #define SPD_EEPROM_ADDRESS     0x51
@@ -79,10 +71,6 @@
 #endif
 #endif
 
-#ifndef SPL_NO_IFC
-#define CONFIG_NAND_FSL_IFC
-#endif
-
 #define CONFIG_SYS_NAND_MAX_ECCPOS     256
 #define CONFIG_SYS_NAND_MAX_OOBFREE    2
 
@@ -101,8 +89,6 @@
                                | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
                                | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 /* ONFI NAND Flash mode0 Timing Params */
 #define CONFIG_SYS_NAND_FTIM0          (FTIM0_NAND_TCCST(0x07) | \
                                        FTIM0_NAND_TWP(0x18)   | \
@@ -121,8 +107,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
-
 #ifndef SPL_NO_QIXIS
 #define CONFIG_FSL_QIXIS
 #endif
@@ -205,7 +189,7 @@
 
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
-#define I2C_MUX_CH_VOL_MONITOR          0xA
+#define I2C_MUX_CH_VOL_MONITOR         0xA
 /* Voltage monitor on channel 2*/
 #define I2C_VOL_MONITOR_ADDR           0x63
 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
@@ -223,12 +207,6 @@
 #define CONFIG_VOL_MONITOR_LTC3882_SET
 #define CONFIG_VOL_MONITOR_LTC3882_READ
 
-/* PM Bus commands code for LTC3882*/
-#define PMBUS_CMD_PAGE                  0x0
-#define PMBUS_CMD_READ_VOUT             0x8B
-#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
-#define PMBUS_CMD_VOUT_COMMAND          0x21
-
 #define PWM_CHANNEL0                    0x0
 
 /*
@@ -249,13 +227,8 @@
 #endif
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM              0
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
@@ -269,45 +242,45 @@
 /* Initial environment variables */
 #ifdef CONFIG_TFABOOT
 #define QSPI_MC_INIT_CMD                               \
-       "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"    \
-       "sf read 0x80100000 0xE00000 0x100000;"                         \
+       "sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;"    \
+       "sf read 0x80e00000 0xE00000 0x100000;"                         \
        "env exists secureboot && "                     \
        "sf read 0x80640000 0x640000 0x40000 && "       \
        "sf read 0x80680000 0x680000 0x40000 && "       \
        "esbc_validate 0x80640000 && "                  \
        "esbc_validate 0x80680000 ;"                    \
-       "fsl_mc start mc 0x80000000 0x80100000\0"
+       "fsl_mc start mc 0x80a00000 0x80e00000\0"
 #define SD_MC_INIT_CMD                         \
-       "mmcinfo;mmc read 0x80000000 0x5000 0x800;"             \
-       "mmc read 0x80100000 0x7000 0x800;"                             \
+       "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;"            \
+       "mmc read 0x80e00000 0x7000 0x800;"                             \
        "env exists secureboot && "                     \
        "mmc read 0x80640000 0x3200 0x20 && "           \
        "mmc read 0x80680000 0x3400 0x20 && "           \
        "esbc_validate 0x80640000 && "                  \
        "esbc_validate 0x80680000 ;"                    \
-       "fsl_mc start mc 0x80000000 0x80100000\0"
+       "fsl_mc start mc 0x80a00000 0x80e00000\0"
 #else
 #if defined(CONFIG_QSPI_BOOT)
 #define MC_INIT_CMD                            \
-       "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
-       "sf read 0x80100000 0xE00000 0x100000;"                         \
+       "mcinitcmd=sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;"  \
+       "sf read 0x80e00000 0xE00000 0x100000;"                         \
        "env exists secureboot && "                     \
        "sf read 0x80640000 0x640000 0x40000 && "       \
        "sf read 0x80680000 0x680000 0x40000 && "       \
        "esbc_validate 0x80640000 && "                  \
        "esbc_validate 0x80680000 ;"                    \
-       "fsl_mc start mc 0x80000000 0x80100000\0"       \
+       "fsl_mc start mc 0x80a00000 0x80e00000\0"       \
        "mcmemsize=0x70000000\0"
 #elif defined(CONFIG_SD_BOOT)
 #define MC_INIT_CMD                            \
-       "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"           \
-       "mmc read 0x80100000 0x7000 0x800;"                             \
+       "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;"          \
+       "mmc read 0x80e00000 0x7000 0x800;"                             \
        "env exists secureboot && "                     \
        "mmc read 0x80640000 0x3200 0x20 && "           \
        "mmc read 0x80680000 0x3400 0x20 && "           \
        "esbc_validate 0x80640000 && "                  \
        "esbc_validate 0x80680000 ;"                    \
-       "fsl_mc start mc 0x80000000 0x80100000\0"       \
+       "fsl_mc start mc 0x80a00000 0x80e00000\0"       \
        "mcmemsize=0x70000000\0"
 #endif
 #endif /* CONFIG_TFABOOT */
@@ -515,15 +488,11 @@
 #endif
 #endif
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #ifndef SPL_NO_ENV
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
+       func(USB, usb, 0) \
        func(SCSI, scsi, 0) \
        func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
Domain: System / Kernel;